PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5172-1
5172-1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BRUSH,ELECTRICAL CONTACT is a the manufacturer industrial component. Key specifications include width: 0.156 INCHES NOMINAL IN, length: 0.563 INCHES NOMINAL IN, radius: 0.563 INCHES NOMINAL IN, material: ELECTROGRAPHITIC, thickness: 0.250 INCHES NOMINAL IN, top_style: FLAT WITH LEFT AND RIGHT EDGE BEVELED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-083-1282, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5172-1
NSN: 3110-00-083-1282
FSC: 3110
CAGE: 93835 — PARKER HANNIFIN CORPORATION DIV HYDRAULIC SYSTEMS DIVISION (USA)
SPECIFICATIONS
width0.156 INCHES NOMINAL IN
length0.563 INCHES NOMINAL IN
radius0.563 INCHES NOMINAL IN
materialELECTROGRAPHITIC
thickness0.250 INCHES NOMINAL IN
top_styleFLAT WITH LEFT AND RIGHT EDGE BEVELED
body_styleRECTANGULAR
head_styleROUND
bevel_depth0.030 INCHES NOMINAL IN
head_height0.075 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
bevel_length0.026 INCHES NOMINAL IN
bore_diameter2.4350 INCHES MINIMUM AND 2.4400 INCHES MAXIMUM IN
NSN3110-00-083-1282
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5172-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOCATING FEATURE: NONLOCATING
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 2.4350 INCHES MINIMUM AND 2.4400 INCHES MAXIMUM IN
•
OVERALL OUTSIDE DIAMETER: 3.3420 INCHES MINIMUM AND 3.3430 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.5570 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
LOCATING FEATURENONLOCATING
SURFACE FINISHGROUND
BORE DIAMETER2.4350 INCHES MINIMUM AND 2.4400 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER3.3420 INCHES MINIMUM AND 3.3430 INCHES MAXIMUM IN
SPECIAL FEATURESEXTENDED INNER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
5172-1Interchangeable
interchangeable cross-reference
interchangeable
10680Interchangeable
interchangeable cross-reference
interchangeable
BR1171-1RWInterchangeable
Same NIIN cross-reference
interchangeable
MCS1912-906Interchangeable
Same NIIN cross-reference
interchangeable
MCS1912-903Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5172-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5172-1?
5172-1 is a BRUSH,ELECTRICAL CONTACT.
What parts can replace 5172-1?
There are 5 known substitutes for 5172-1: 5172-1, 10680, BR1171-1RW and 2 more. Substitute compatibility should be verified for your specific system.
Is 5172-1 still available?
5172-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5172-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026