PartsTable
Technical Data Sheet
Download PDF

5171080-1 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5171080-1: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.312 INCHES NOMINAL IN, length: 0.188 INCHES NOMINAL IN, material: COPPER ALLOY 172 OVERALL, hole_diameter: 0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN, overall_height: 0.170 INCHES NOMINAL IN, mounting_method: PROJECTING TAB AND THREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-283-7355, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5171080-1
NSN: 5340-01-283-7355
FSC: 5340 — Hardware, Commercial
CAGE: 55972 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS (USA)
SPECIFICATIONS
width0.312 INCHES NOMINAL IN
length0.188 INCHES NOMINAL IN
materialCOPPER ALLOY 172 OVERALL
hole_diameter0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
overall_height0.170 INCHES NOMINAL IN
mounting_methodPROJECTING TAB AND THREADED HOLE(S)
surface_treatmentNICKEL OVERALL
material_thickness0.016 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
loop/holding_dimension0.266 INCHES NOMINAL IN
distance_from_loop_center_to_end0.140 INCHES NOMINAL IN
material_document_and_classificationQQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-283-7355
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5171080-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.188 INCHES NOMINAL IN
•
MOUNTING METHOD: PROJECTING TAB AND THREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.266 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.016 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.140 INCHES NOMINAL IN
•
SURFACE TREATMENT: NICKEL OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.170 INCHES NOMINAL IN
LENGTH0.188 INCHES NOMINAL IN
MOUNTING METHODPROJECTING TAB AND THREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.266 INCHES NOMINAL IN
MATERIAL THICKNESS0.016 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.140 INCHES NOMINAL IN
SURFACE TREATMENTNICKEL OVERALL
WIDTH0.312 INCHES NOMINAL IN
MATERIALCOPPER ALLOY 172 OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5171080-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5171080-1?
5171080-1 is a CLIP,SPRING TENSION.
What is the NSN for 5171080-1?
5171080-1 is cataloged in the U.S. Government catalog under NSN 5340-01-283-7355. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5171080-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.