PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5170-600
5170-600 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The FLANGE,PIPE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY, thickness: 1.062 INCHES NOMINAL IN, neck_height: 1.062 INCHES NOMINAL IN, flange_diameter: 9.000 INCHES NOMINAL IN, style_designator: ROUND, ONE BOLT HOLE CIRCLE, bolt_hole_diameter: 0.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-100-2174, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5170-600
NSN: 4730-01-100-2174
FSC: 4730
CAGE: 72423 — FLAGG STANLEY G & CO INC DBA FLAGG BRASS (USA)
SPECIFICATIONS
materialCOPPER ALLOY
thickness1.062 INCHES NOMINAL IN
neck_height1.062 INCHES NOMINAL IN
flange_diameter9.000 INCHES NOMINAL IN
style_designatorROUND, ONE BOLT HOLE CIRCLE
bolt_hole_diameter0.750 INCHES NOMINAL IN
bolt_hole_quantity8
bolt_circle_diameter7.500 INCHES NOMINAL IN
flange_section_stylePLAIN FACE, BRAZING NECK
nondefinitive_spec/std_data150 CLASS
specification/standard_data80204-ASME B16.24-1979 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
face_seating_surface_conditionMACHINED
NSN4730-01-100-2174
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 5170-600 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED: 150.0 FAHRENHEIT GAS AND 150.0 FAHRENHEIT OIL AND 450.0 FAHRENHEIT STEAM AND 150.0 FAHRENHEIT WATER DEGF
•
THICKNESS: 1.062 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 7.500 INCHES NOMINAL IN
•
OPERATING PRESSURE AND TYPE: 225.0 POUNDS PER SQUARE INCH (PSI) GAS MAXIMUM REQUIRED AND 225.0 POUNDS PER SQUARE INCH (PSI) OIL MAXIMUM REQUIRED AND 150.0 POUNDS PER SQUARE INCH (PSI) STEAM MAXIMUM REQUIRED AND 225.0 POUNDS PER SQUARE INCH (PSI) WATER MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
•
NONDEFINITIVE SPEC/STD DATA: 150 CLASS
•
SPECIFICATION/STANDARD DATA: 80204-ASME B16.24-1979 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
STYLE DESIGNATOR: ROUND, ONE BOLT HOLE CIRCLE
•
BOLT HOLE DIAMETER: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED150.0 FAHRENHEIT GAS AND 150.0 FAHRENHEIT OIL AND 450.0 FAHRENHEIT STEAM AND 150.0 FAHRENHEIT WATER DEGF
THICKNESS1.062 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER7.500 INCHES NOMINAL IN
OPERATING PRESSURE AND TYPE225.0 POUNDS PER SQUARE INCH (PSI) GAS MAXIMUM REQUIRED AND 225.0 POUNDS PER SQUARE INCH (PSI) OIL MAXIMUM REQUIRED AND 150.0 POUNDS PER SQUARE INCH (PSI) STEAM MAXIMUM REQUIRED AND 225.0 POUNDS PER SQUARE INCH (PSI) WATER MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
NONDEFINITIVE SPEC/STD DATA150 CLASS
SPECIFICATION/STANDARD DATA80204-ASME B16.24-1979 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATORROUND, ONE BOLT HOLE CIRCLE
BOLT HOLE DIAMETER0.750 INCHES NOMINAL IN
FLANGE SECTION STYLEPLAIN FACE, BRAZING NECK
NECK HEIGHT1.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
701-010-1Interchangeable
interchangeable cross-reference
interchangeable
701-010Interchangeable
interchangeable cross-reference
interchangeable
B1624Interchangeable
interchangeable cross-reference
interchangeable
B16.24Interchangeable
Same NIIN cross-reference
interchangeable
00699067579811Interchangeable
Same NIIN cross-reference
interchangeable
FIG 5170 SZ 600Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5170-600?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5170-600?
5170-600 is a FLANGE,PIPE.
What parts can replace 5170-600?
There are 6 known substitutes for 5170-600: 701-010-1, 701-010, B1624 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5170-600?
5170-600 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-100-2174. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5170-600

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026