PartsTable
Technical Data Sheet
Download PDF

5167834 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5167834: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, fork_depth: 0.750 INCHES NOMINAL IN, hole_diameter: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, overall_width: 1.000 INCHES NOMINAL IN, overall_height: 1.000 INCHES NOMINAL IN, fork_span_width: 0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-303-9718, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5167834
NSN: 5340-01-303-9718
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
fork_depth0.750 INCHES NOMINAL IN
hole_diameter0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
overall_width1.000 INCHES NOMINAL IN
overall_height1.000 INCHES NOMINAL IN
fork_span_width0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
special_featuresTHRU HOLE ON ROD CONNECTION END PARALLEL TO PIVOT PIN HOLE,0.405 IN. MIN 0411 IN. MAX DIA IN
surface_treatmentPASSIVATE OVERALL
fork_arm_thickness0.3125 INCHES NOMINAL IN
nominal_thread_size0.190 INCHES SECURING PIN HOLE IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) SECURING PIN HOLE
material_document_and_classificationASTM A581,COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-303-9718
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5167834 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.3125 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A581,COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD SIZE: 0.190 INCHES SECURING PIN HOLE IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.000 INCHES NOMINAL IN
FORK SPAN WIDTH0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
FORK ARM THICKNESS0.3125 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A581,COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH1.000 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.190 INCHES SECURING PIN HOLE IN
SPECIAL FEATURESTHRU HOLE ON ROD CONNECTION END PARALLEL TO PIVOT PIN HOLE,0.405 IN. MIN 0411 IN. MAX DIA IN
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 303 OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5167834?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5167834?
5167834 is a CLEVIS,ROD END.
What is the NSN for 5167834?
5167834 is cataloged in the U.S. Government catalog under NSN 5340-01-303-9718. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5167834

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.