PartsTable
Technical Data Sheet
Download PDF

5166463 — CATCH,CLAMPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5166463: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include width: 0.620 INCHES NOMINAL IN, material: STEEL COMP 1010 OVERALL, design_type: LOOP ENGAGING, tongue_width: 0.500 INCHES NOMINAL IN, hole_diameter: 0.144 INCHES NOMINAL IN, overall_length: 0.630 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-992-8139, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5166463
NSN: 5340-00-992-8139
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
width0.620 INCHES NOMINAL IN
materialSTEEL COMP 1010 OVERALL
design_typeLOOP ENGAGING
tongue_width0.500 INCHES NOMINAL IN
hole_diameter0.144 INCHES NOMINAL IN
hole_quantity4
overall_length0.630 INCHES NOMINAL IN
operation_methodLEVER
style_designatorLEVER
surface_treatmentCADMIUM AND CHROMATE OVERALL
catch_strike_styleMORTISE
material_thickness0.072 INCHES NOMINAL IN
NSN5340-00-992-8139
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5166463 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE HOLE QUANTITY: 2
•
TONGUE WIDTH: 0.500 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
•
DESIGN TYPE: LOOP ENGAGING
•
ENGAGING SURFACE WIDTH: 0.630 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.072 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LEVER
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE HOLE QUANTITY2
TONGUE WIDTH0.500 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
DESIGN TYPELOOP ENGAGING
ENGAGING SURFACE WIDTH0.630 INCHES NOMINAL IN
MATERIAL THICKNESS0.072 INCHES NOMINAL IN
STYLE DESIGNATORLEVER
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CATCH STRIKE STYLEMORTISE
OVERALL LENGTH0.630 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 6
874149-00Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ZSP2-204-1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
9M640L1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ZSP2-204Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HC83314-802CEReference document
Same NSN cross-reference
Reference document — Design control — primary reference
HC83314-802Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5166463?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5166463?
5166463 is a CATCH,CLAMPING.
What parts can replace 5166463?
There are 6 known substitutes for 5166463: 874149-00, ZSP2-204-1, 9M640L1 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5166463?
5166463 is cataloged in the U.S. Government catalog under NSN 5340-00-992-8139. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5166463

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.