PartsTable
Technical Data Sheet
PartsTable / MRO / 51626
51626 ✓ Verified by PartsTable
Hama · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FILTER ELEMENT,FLUID is a Hama industrial component. Key specifications include material: COPPER ALLOY OVERALL, design_type: NONREUSABLE, body_diameter: 3.812 INCHES NOMINAL IN, hole_diameter: 0.478 INCHES MINIMUM AND 0.481 INCHES MAXIMUM IN, flow_direction: OUTSIDE IN, outside_diameter: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-202-1113, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 51626
NSN: 5330-00-202-1113
FSC: 5330
CAGE: 78493 — STANDARD-THOMSON CORPORATION (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
design_typeNONREUSABLE
body_diameter3.812 INCHES NOMINAL IN
hole_diameter0.478 INCHES MINIMUM AND 0.481 INCHES MAXIMUM IN
flow_directionOUTSIDE IN
outside_diameter0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
special_featuresAM GENERAL JEEP,1987-89; GRUMMAN AEROSPACE A-10 AIRCRAFT
style_designatorKEY
aperture_diameter0.500 INCHES NOMINAL IN
features_providedANTIDRAIN BACK DEVICE
surface_treatmentNICKEL OVERALL
material_thickness0.025 INCHES NOMINAL IN
NSN5330-00-202-1113
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 51626 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 0.812 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESVULCANIZED FIBER MATERIAL
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
APERTURE DIAMETER0.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER0.812 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
51626Interchangeable
interchangeable cross-reference
interchangeable
51380Interchangeable
interchangeable cross-reference
interchangeable
51381Interchangeable
interchangeable cross-reference
interchangeable
PH3562Interchangeable
interchangeable cross-reference
interchangeable
014030001Interchangeable
interchangeable cross-reference
interchangeable
3-7263-141Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 51626?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 51626?
51626 is a FILTER ELEMENT,FLUID manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 51626?
There are 6 known substitutes for 51626: 51626, 51380, 51381 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 51626?
51626 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-202-1113. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 51626

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026