PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 516-16C
516-16C ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ADAPTER,STRAIGHT,TUBE TO HOSE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, seat_angle: 37.0 DEGREES FIRST END, thread_class: 3B FIRST END, connection_type: THREADED EXTERNAL HOSE GRIPPING SECOND END, connection_style: GRIPPING NIPPLE (NOSE) SECOND END, special_features: USED ON BOEING VERTOLCARGO TRANSPORT HELICOPTER,MODEL CH-47. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-146-9974, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
516-16C
NSN: 5330-00-146-9974
FSC: 5330
CAGE: 50024 — COLTEC INDUSTRIES INC DBA FAIRBANKS MORSE ENGINE FM/ALCO (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
seat_angle37.0 DEGREES FIRST END
thread_class3B FIRST END
connection_typeTHREADED EXTERNAL HOSE GRIPPING SECOND END
connection_styleGRIPPING NIPPLE (NOSE) SECOND END
special_featuresUSED ON BOEING VERTOLCARGO TRANSPORT HELICOPTER,MODEL CH-47
surface_treatmentANODIZE OVERALL
nominal_thread_size1.312 INCHES FIRST END IN
nominal_overall_length2.641 INCHES IN
thread_quantity_per_inch12 FIRST END
thread_series_designatorUN FIRST END
specification/standard_data81349-MIL-F-83798 GOVERNMENT SPECIFICATION AND 81349-MIL-F-83798/1-16 GOVERNMENT SPECIFICATION
NSN5330-00-146-9974
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 516-16C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE CORNER RADIUS: 0.812 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 5.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.812 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 5.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE CORNER RADIUS0.812 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH5.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH6.875 INCHES NOMINAL IN
OVERALL WIDTH6.875 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.812 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH5.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
BOLT HOLE QUANTITY4
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.812 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
136-1000-16DInterchangeable
interchangeable cross-reference
interchangeable
M83798/1-16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 516-16C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 516-16C?
516-16C is a ADAPTER,STRAIGHT,TUBE TO HOSE.
What parts can replace 516-16C?
There are 2 known substitutes for 516-16C: 136-1000-16D, M83798/1-16. Substitute compatibility should be verified for your specific system.
What is the NSN for 516-16C?
516-16C is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-146-9974. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 516-16C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026