PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 515820
515820 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include general_characteristics_item_description: 20.000 IN. O/A LG; SHOCK PROOF IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-774-4566, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
515820
NSN: 5330-00-774-4566
FSC: 5330
CAGE: 63728 — SEALCRAFT CORPORATION (USA)
SPECIFICATIONS
general_characteristics_item_description20.000 IN. O/A LG; SHOCK PROOF IN
NSN5330-00-774-4566
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 515820 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 2.531 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.360 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,+1141-A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: ASBESTOS AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
•
OUTSIDE CORNER RADIUS: 0.380 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.020 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE DIAMETER2.531 INCHES NOMINAL IN
HOLE DIAMETER0.360 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,+1141-A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALASBESTOS AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
OUTSIDE CORNER RADIUS0.380 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.020 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
9540-20Interchangeable
interchangeable cross-reference
interchangeable
9540Interchangeable
interchangeable cross-reference
interchangeable
5158-20Interchangeable
interchangeable cross-reference
interchangeable
7744566Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 515820?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 515820?
515820 is a GASKET.
What parts can replace 515820?
There are 4 known substitutes for 515820: 9540-20, 9540, 5158-20 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 515820?
515820 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-774-4566. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 515820

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026