PartsTable / COMPONENT / 5157702
5157702
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.406 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 1.000 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.065 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-286-1869, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
5157702
NSN: 5340-00-286-1869 FSC: 5340 CAGE: 72582 — ROLLS-ROYCE SOLUTIONS AMERICA INC (USA)
SPECIFICATIONS
diameter 0.406 INCHES NOMINAL IN material STEEL BAND overall_width 1.000 INCHES NOMINAL IN style_designator SINGLE LOOP tongue_hole_type ROUND, UNTHREADED material_thickness 0.065 INCHES NOMINAL IN loop_inside_diameter 1.000 INCHES NOMINAL IN distance_from_loop_center_to_tongue_end 1.500 INCHES NOMINAL IN center_to_center_distance_between_loop_and_mounting_hole 1.125 INCHES NOMINAL IN NSN 5340-00-286-1869
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 5157702
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• DISTANCE FROM LOOP CENTER TO TONGUE END: 1.500 INCHES NOMINAL IN
• STYLE DESIGNATOR: SINGLE LOOP
• LOOP INSIDE DIAMETER: 1.000 INCHES NOMINAL IN
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.125 INCHES NOMINAL IN
• MATERIAL THICKNESS: 0.065 INCHES NOMINAL IN
• TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH 1.000 INCHES NOMINAL IN DISTANCE FROM LOOP CENTER TO TONGUE END 1.500 INCHES NOMINAL IN STYLE DESIGNATOR SINGLE LOOP LOOP INSIDE DIAMETER 1.000 INCHES NOMINAL IN CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 1.125 INCHES NOMINAL IN MATERIAL STEEL BAND MATERIAL THICKNESS 0.065 INCHES NOMINAL IN TONGUE HOLE TYPE ROUND, UNTHREADED DIAMETER 0.406 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
TC223 Interchangeable interchangeable cross-reference
interchangeable
L2125F Interchangeable interchangeable cross-reference
interchangeable
244P Interchangeable interchangeable cross-reference
interchangeable
A247833 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 5157702?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5157702?
5157702 is a CLAMP,LOOP.
What parts can replace 5157702?
There are 4 known substitutes for 5157702: TC223, L2125F, 244P and 1 more. Substitute compatibility should be verified for your specific system.
Is 5157702 still available?
5157702 is currently cancelled.
Request a Quote — 5157702