PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 51571878PC142583
51571878PC142583 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,RETAINING is a the manufacturer industrial component. Key specifications include width: 0.188 INCHES NOMINAL IN, material: STEEL, overall_height: 0.625 INCHES NOMINAL IN, stock_diameter: 0.048 INCHES NOMINAL IN, style_designator: PIN, casehardening_indicator: NOT CASEHARDENED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-014-2583, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
51571878PC142583
NSN: 5340-00-014-2583
FSC: 5340
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
width0.188 INCHES NOMINAL IN
materialSTEEL
overall_height0.625 INCHES NOMINAL IN
stock_diameter0.048 INCHES NOMINAL IN
style_designatorPIN
casehardening_indicatorNOT CASEHARDENED
NSN5340-00-014-2583
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 51571878PC142583 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: PIN
•
MATERIAL: STEEL
•
WIDTH: 0.188 INCHES NOMINAL IN
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
STOCK DIAMETER: 0.048 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORPIN
MATERIALSTEEL
WIDTH0.188 INCHES NOMINAL IN
OVERALL HEIGHT0.625 INCHES NOMINAL IN
CASEHARDENING INDICATORNOT CASEHARDENED
STOCK DIAMETER0.048 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
142583Interchangeable
interchangeable cross-reference
interchangeable
185431PC261Interchangeable
interchangeable cross-reference
interchangeable
166262PC127Interchangeable
interchangeable cross-reference
interchangeable
AS4855Interchangeable
interchangeable cross-reference
interchangeable
AS4855D02Interchangeable
interchangeable cross-reference
interchangeable
33504Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 51571878PC142583?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 51571878PC142583?
51571878PC142583 is a CLIP,RETAINING.
What parts can replace 51571878PC142583?
There are 18 known substitutes for 51571878PC142583: 142583, 185431PC261, 166262PC127 and 15 more. Substitute compatibility should be verified for your specific system.
Is 51571878PC142583 still available?
51571878PC142583 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 51571878PC142583

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026