PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 515408-1
515408-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TRANSFORMER,POWER is a the manufacturer industrial component. Key specifications include phase: THREE INPUT, width: 36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN, material: PAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED, thickness: 0.009 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN, duty_cycle: INTERMITTENT, fiber_type: ANIMAL OR PLANT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-270-8467, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
515408-1
NSN: 5330-00-270-8467
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
phaseTHREE INPUT
width36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN
materialPAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED
thickness0.009 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
duty_cycleINTERMITTENT
fiber_typeANIMAL OR PLANT
power_rating0.0800 HORSEPOWER OUTPUT
winding_typeINDUCTION-SQUIRREL CAGE
time_interval1.0 MINUTES MAXIMUM ON AND 15.0 MINUTES MINIMUM OFF
shaft_end_styleDRILLED HOLE SINGLE END
enclosure_featureGENERAL PURPOSE
frequency_in_hertz400.0 INPUT
NSN5330-00-270-8467
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 515408-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIBER TYPE: ANIMAL OR PLANT
•
ENVIRONMENTAL PROTECTION: GASOLINE OR OIL RESISTANT AND WATER RESISTANT
•
THICKNESS: 0.009 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
•
MATERIAL: PAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96, TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
•
NONDEFINITIVE SPEC/STD DATA: I TYPE
•
WIDTH: 36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
FIBER TYPEANIMAL OR PLANT
ENVIRONMENTAL PROTECTIONGASOLINE OR OIL RESISTANT AND WATER RESISTANT
THICKNESS0.009 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
MATERIALPAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96, TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
NONDEFINITIVE SPEC/STD DATAI TYPE
WIDTH36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
28-032Interchangeable
interchangeable cross-reference
interchangeable
1432Interchangeable
interchangeable cross-reference
interchangeable
9310-00-264-5346Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-2880Interchangeable
interchangeable cross-reference
interchangeable
PA8159ISSUE1Interchangeable
interchangeable cross-reference
interchangeable
AABPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 515408-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 515408-1?
515408-1 is a TRANSFORMER,POWER.
What parts can replace 515408-1?
There are 23 known substitutes for 515408-1: 28-032, 1432, 9310-00-264-5346 and 20 more. Substitute compatibility should be verified for your specific system.
Is 515408-1 still available?
515408-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 515408-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026