PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5153473
5153473 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.406 INCHES NOMINAL IN, overall_width: 0.625 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM OR ZINC AND CHROMATE BAND, material_thickness: 0.032 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-0672, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5153473
NSN: 5340-00-598-0672
FSC: 5340
CAGE: 72582 — ROLLS-ROYCE SOLUTIONS AMERICA INC (USA)
SPECIFICATIONS
diameter0.406 INCHES NOMINAL IN
overall_width0.625 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCADMIUM OR ZINC AND CHROMATE BAND
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.500 INCHES NOMINAL IN
end_item_identification2320-01-097-0260 HEMTT (HEAVY EXPANDED MOBILITY TACTICAL TRUCK)
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES BAND
distance_from_loop_center_to_tongue_end1.031 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.719 INCHES NOMINAL IN
NSN5340-00-598-0672
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5153473 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
DIAMETER: 0.406 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.875 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.375 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL BAND
OVERALL WIDTH0.750 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
DIAMETER0.406 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.875 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
DISTANCE FROM LOOP CENTER TO TONGUE END1.375 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
4B418Upgraded Successor
successor cross-reference
successor
5153473Upgraded Successor
successor cross-reference
successor
1DD956Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5153473?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5153473?
5153473 is a CLAMP,LOOP.
What parts can replace 5153473?
There are 3 known substitutes for 5153473: 4B418, 5153473, 1DD956. Substitute compatibility should be verified for your specific system.
What is the NSN for 5153473?
5153473 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-0672. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5153473

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026