515337: GEAR,SPUR.
The INTELLINET NETWORK SOLUTIONS Fast Ethernet Media Converter was specifically designed to offer the network designer a device for migration from copper-based Ethernet to Fiber Ethernet. Now migration or expansion of existing networks can be achieved with minimum cost and complexity. The converter is completely transparent to the network so the network performs exactly the way it did before – only now it can support both copper and fiber mediums.
Expands the Size of an Existing Network Provides fiber connectivity to Ethernet segments, allowing for even further networking expansion between extended workgroups. Also provides building-to-building connectivity without the need for the cost and disruption associated with the installation of additional routers. Enhances the Distance between Networking Devices Connecting the converter to fiber segments can further extend distances between networking nodes.
This can be achieved by direct connection between the converter an This part is cataloged in the U.S. Government catalog under NSN 3020-00-753-9482, indicating validated use in U.S. government and defense logistics supply chains.
| material | STEEL COMP 8620H OVERALL |
| body_style | WEBBED, SOLID |
| bore_style | INVOLUTE SPLINE BOTH ENDS |
| tooth_form | STANDARD |
| pitch_diameter | 4.1250 INCHES NOMINAL IN |
| pressure_angle | 20.0000 DEGREES |
| teeth_quantity | 33 |
| hardness_rating | 58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL |
| spline_quantity | 22 BOTH ENDS |
| style_designator | PROTRUDING HUBS |
| face_nominal_width | 0.500 INCHES IN |
| hub_nominal_diameter | 2.560 INCHES SECOND END IN |
| NSN | 3020-00-753-9482 |
| BORE NOMINAL DIAMETER | 2.350 INCHES BOTH ENDS IN |
| HUB NOMINAL DIAMETER | 2.620 INCHES FIRST END IN |
| HUB NOMINAL DIAMETER | 2.560 INCHES SECOND END IN |
| TEETH QUANTITY | 33 |
| BODY STYLE | WEBBED, SOLID |
| COUNTERBORE NOMINAL DIAMETER | 2.385 INCHES FIRST END IN |
| BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.280 INCHES FIRST END IN |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.030 INCHES SECOND END IN |
| HARDNESS RATING | 58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL |
No substitute or cross-reference records for this part.