PartsTable
Technical Data Sheet
Download PDF

5152899 — PUMP,ENGINE PRIMING,HAND DRIVEN

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5152899: PUMP,ENGINE PRIMING,HAND DRIVEN.

PUMP,ENGINE PRIMING,HAND DRIVEN. Key specifications include end_item_identification: 38102239376. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-052-3926, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5152899
NSN: 5315-00-052-3926
NIINs: 000523926, 003637471
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
end_item_identification38102239376
NSN5315-00-052-3926
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5152899 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.020 INCHES NOMINAL IN
•
FIRST END LOCATION: SHOULDER END
•
FIRST END STYLE: CHAMFERED
•
HARDNESS RATING: 32.0 ROCKWELL C MINIMUM AND 39.0 ROCKWELL C MAXIMUM OVERALL
•
SHANK LENGTH: 0.357 INCHES MINIMUM AND 0.367 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SHOULDER
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.020 INCHES NOMINAL IN
FIRST END LOCATIONSHOULDER END
FIRST END STYLECHAMFERED
HARDNESS RATING32.0 ROCKWELL C MINIMUM AND 39.0 ROCKWELL C MAXIMUM OVERALL
SHANK LENGTH0.357 INCHES MINIMUM AND 0.367 INCHES MAXIMUM IN
STYLE DESIGNATORSHOULDER
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH0.742 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
SUBSTITUTES & CROSS-REFERENCES 4
A10296Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5315000523926Reference document
Same NSN cross-reference
Reference document — Informative reference only
5315PL1864684Reference document
Same NSN cross-reference
Reference document — Informative reference only
201010306Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5152899?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5152899?
5152899 is a PUMP,ENGINE PRIMING,HAND DRIVEN.
What parts can replace 5152899?
There are 4 known substitutes for 5152899: A10296, 5315000523926, 5315PL1864684 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5152899?
5152899 is cataloged in the U.S. Government catalog under NSN 5315-00-052-3926. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5152899