PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5150900
5150900 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ASBESTOS AND RUBBER SYNTHETIC OVERALL, hole_diameter: 0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.188 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 0.938 INCHES NOMINAL IN, bolt_circle_diameter: 1.375 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-250-5816, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5150900
NSN: 5330-00-250-5816
FSC: 5330
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialASBESTOS AND RUBBER SYNTHETIC OVERALL
hole_diameter0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.188 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter0.938 INCHES NOMINAL IN
bolt_hole_quantity2
bolt_circle_diameter1.375 INCHES NOMINAL IN
outside_corner_radius0.281 INCHES NOMINAL IN
cross-sectional_thickness0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center0.750 INCHES NOMINAL IN
NSN5330-00-250-5816
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5150900 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: ASBESTOS AND RUBBER SYNTHETIC OVERALL
•
OUTSIDE CORNER RADIUS: 0.281 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
SIDE RADIUS FROM GASKET CENTER: 0.750 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
BOLT HOLE QUANTITY: 2
•
BOLT CIRCLE DIAMETER: 1.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALASBESTOS AND RUBBER SYNTHETIC OVERALL
OUTSIDE CORNER RADIUS0.281 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
SIDE RADIUS FROM GASKET CENTER0.750 INCHES NOMINAL IN
HOLE DIAMETER0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH2.188 INCHES NOMINAL IN
BOLT HOLE QUANTITY2
BOLT CIRCLE DIAMETER1.375 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
APERTURE DIAMETER0.938 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
5184376Interchangeable
interchangeable cross-reference
interchangeable
5119973Interchangeable
interchangeable cross-reference
interchangeable
1DD163Interchangeable
interchangeable cross-reference
interchangeable
402Interchangeable
interchangeable cross-reference
interchangeable
1302Interchangeable
interchangeable cross-reference
interchangeable
12201Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5150900?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5150900?
5150900 is a GASKET.
What parts can replace 5150900?
There are 13 known substitutes for 5150900: 5184376, 5119973, 1DD163 and 10 more. Substitute compatibility should be verified for your specific system.
Is 5150900 still available?
5150900 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5150900

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026