PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 515085
515085 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CABLE ASSEMBLY,POWER,ELECTRICAL,. Key specifications include height: 2.000 INCHES NOMINAL IN, load_rating: 90.0 POUNDS MAXIMUM LBS, flange_width: 2.750 INCHES NOMINAL IN, flange_length: 4.750 INCHES NOMINAL IN, inside_diameter: 0.512 INCHES MINIMUM AND 0.552 INCHES MAXIMUM IN, flange_thickness: 0.150 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-471-5641, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
515085
NSN: 5340-01-471-5641
FSC: 5340
CAGE: 5P059 — TECH PRODUCTS CORP (USA)
SPECIFICATIONS
height2.000 INCHES NOMINAL IN
load_rating90.0 POUNDS MAXIMUM LBS
flange_width2.750 INCHES NOMINAL IN
flange_length4.750 INCHES NOMINAL IN
inside_diameter0.512 INCHES MINIMUM AND 0.552 INCHES MAXIMUM IN
flange_thickness0.150 INCHES NOMINAL IN
special_featuresCOLOR IS WHITE
style_designatorROUND TWO-HOLE FLANGE
end_item_identificationAIR WHEELED T
distance_from_flange_to_end1.020 INCHES NOMINAL IN
flange_mounting_hole_diameter0.406 INCHES NOMINAL IN
distance_between_mounting_hole_centers3.750 INCHES NOMINAL IN
NSN5340-01-471-5641
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 515085 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE THICKNESS: 0.150 INCHES NOMINAL IN
•
FLANGE LENGTH: 4.750 INCHES NOMINAL IN
•
FLANGE WIDTH: 2.750 INCHES NOMINAL IN
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 3.750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ROUND TWO-HOLE FLANGE
•
HEIGHT: 2.000 INCHES NOMINAL IN
•
DISTANCE FROM FLANGE TO END: 1.020 INCHES NOMINAL IN
•
INSIDE DIAMETER: 0.512 INCHES MINIMUM AND 0.552 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
FLANGE THICKNESS0.150 INCHES NOMINAL IN
FLANGE LENGTH4.750 INCHES NOMINAL IN
FLANGE WIDTH2.750 INCHES NOMINAL IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS3.750 INCHES NOMINAL IN
STYLE DESIGNATORROUND TWO-HOLE FLANGE
HEIGHT2.000 INCHES NOMINAL IN
DISTANCE FROM FLANGE TO END1.020 INCHES NOMINAL IN
INSIDE DIAMETER0.512 INCHES MINIMUM AND 0.552 INCHES MAXIMUM IN
SPECIAL FEATURESCOLOR IS WHITE
FLANGE MOUNTING HOLE DIAMETER0.406 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
26882Interchangeable
interchangeable cross-reference
interchangeable
K26882Interchangeable
interchangeable cross-reference
interchangeable
0209899-4Interchangeable
interchangeable cross-reference
interchangeable
BM11352-171Interchangeable
interchangeable cross-reference
interchangeable
MS14304Interchangeable
interchangeable cross-reference
interchangeable
MS14304-5AQVInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 515085?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 515085?
515085 is a CABLE ASSEMBLY,POWER,ELECTRICAL,.
What parts can replace 515085?
There are 13 known substitutes for 515085: 26882, K26882, 0209899-4 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 515085?
515085 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-471-5641. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 515085

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026