PartsTable
Technical Data Sheet
5150237 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The VALVE,CHECK is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, connection_type: THREADED INTERNAL PIPE ALL ENDS, connection_style: PLAIN, OPTIONAL END (PIPE) ALL ENDS, special_features: STOP CHECK TYPE, style_designator: STRAIGHT THRU, thread_direction: RIGHT-HAND ALL ENDS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-364-3088, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5150237
NSN: 5330-00-364-3088
FSC: 5330
CAGE: 80072 — H20 TANK INC U S MOTORS DIV (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
connection_typeTHREADED INTERNAL PIPE ALL ENDS
connection_stylePLAIN, OPTIONAL END (PIPE) ALL ENDS
special_featuresSTOP CHECK TYPE
style_designatorSTRAIGHT THRU
thread_directionRIGHT-HAND ALL ENDS
mounting_positionHORIZONTAL OR VERTICAL
operating_pressure1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
disk_loading_methodSPRING
flow_control_devicePOPPET
nominal_thread_size2.000 INCHES ALL ENDS IN
maximum_operating_temp300.0 FAHRENHEIT SINGLE RESPONSE DEGF
NSN5330-00-364-3088
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5150237 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
APERTURE WIDTH: 12.312 INCHES NOMINAL IN
MATERIAL: ASBESTOS AND RUBBER SYNTHETIC OVERALL
APERTURE LENGTH: 13.500 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS: 0.014 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE WIDTH12.312 INCHES NOMINAL IN
MATERIALASBESTOS AND RUBBER SYNTHETIC OVERALL
APERTURE LENGTH13.500 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.014 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
05593Interchangeable
interchangeable cross-reference
interchangeable
2-9-249Interchangeable
interchangeable cross-reference
interchangeable
MILC43613Interchangeable
interchangeable cross-reference
interchangeable
5115656NInterchangeable
interchangeable cross-reference
interchangeable
5115656Interchangeable
interchangeable cross-reference
interchangeable
515-0237Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5150237?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5150237?
5150237 is a VALVE,CHECK.
What parts can replace 5150237?
There are 13 known substitutes for 5150237: 05593, 2-9-249, MILC43613 and 10 more. Substitute compatibility should be verified for your specific system.
Is 5150237 still available?
5150237 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5150237