PartsTable
Technical Data Sheet
Download PDF

5150-095 — NUT,PLAIN,SLOTTED,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5150-095: NUT,PLAIN,SLOTTED,HEXAGON.

The NUT,PLAIN,SLOTTED,HEXAGON is a the manufacturer industrial component. Key specifications include part_name_assigned_by_controlling_agency: TIP IRRIGATOR SURG MULTIPLE ORIFICES 4.50" LG 3/16" OD PLAS 10S. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-266-0496, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5150-095
NSN: 5310-00-266-0496
NIINs: 002660496, 013874950
FSC: 5310 — Nuts and Washers
CAGE: 72582 — ROLLS-ROYCE SOLUTIONS AMERICA INC (USA)
SPECIFICATIONS
part_name_assigned_by_controlling_agencyTIP IRRIGATOR SURG MULTIPLE ORIFICES 4.50" LG 3/16" OD PLAS 10S
NSN5310-00-266-0496
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5150-095 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
HARDNESS RATING: 28.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.438 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 4 TYPE AND 17 STYLE
•
NUT HEIGHT: 0.521 INCHES MINIMUM AND 0.541 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN
THREAD SERIESUNF
HARDNESS RATING28.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.438 INCHES IN
NONDEFINITIVE SPEC/STD DATA4 TYPE AND 17 STYLE
NUT HEIGHT0.521 INCHES MINIMUM AND 0.541 INCHES MAXIMUM IN
NUT STYLESLOTTED, HEXAGON
THREAD CLASS3B
SUBSTITUTES & CROSS-REFERENCES 1
FFN836Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5150-095?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5150-095?
5150-095 is a NUT,PLAIN,SLOTTED,HEXAGON.
What parts can replace 5150-095?
There is 1 known substitute for 5150-095: FFN836. Substitute compatibility should be verified for your specific system.
What is the NSN for 5150-095?
5150-095 is cataloged in the U.S. Government catalog under NSN 5310-00-266-0496. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5150-095

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.