PartsTable
Technical Data Sheet
PartsTable / MRO / 514762
514762 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: STEEL CORROSION RESISTING OVERALL, body_width: 0.375 INCHES NOMINAL IN, body_height: 0.343 INCHES NOMINAL IN, body_length: 2.000 INCHES NOMINAL IN, construction: ONE-PIECE, terminal_type: TAB, SOLDER LUG. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-651-5227, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 514762
NSN: 5330-00-651-5227
FSC: 5330
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
body_width0.375 INCHES NOMINAL IN
body_height0.343 INCHES NOMINAL IN
body_length2.000 INCHES NOMINAL IN
constructionONE-PIECE
terminal_typeTAB, SOLDER LUG
inclosure_typeENCAPSULATED
overall_height0.640 INCHES NOMINAL IN
terminal_width0.125 INCHES NOMINAL IN
seal_seat_depth0.067 INCHES NOMINAL IN
terminal_length0.250 INCHES NOMINAL IN
flange_thickness0.120 INCHES NOMINAL IN
NSN5330-00-651-5227
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 514762 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL SEAT DEPTH: 0.067 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5512 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
BOLT HOLE DIAMETER: 0.281 INCHES NOMINAL IN
•
MOUNTING FLANGE LENGTH: 9.580 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.120 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PART NAME ASSIGNED BY CONTROLLING AGENCYPLATE,SEAL RETAINING-OIL TRANS
SEAL SEAT DEPTH0.067 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5512 ASSN STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL CORROSION RESISTING OVERALL
OVERALL HEIGHT0.640 INCHES NOMINAL IN
BOLT HOLE DIAMETER0.281 INCHES NOMINAL IN
MOUNTING FLANGE LENGTH9.580 INCHES NOMINAL IN
FLANGE THICKNESS0.120 INCHES NOMINAL IN
CONSTRUCTIONONE-PIECE
SPECIAL FEATURES6 UNTHD HOLES EQUAL DISTANCE APART;2 THD HOLES SIZE 0.250-28 UNF-28,ARE BETWEEN UNTHD HOLES ONE ON EITHER SIDE ON DIAMETER 30 DEGREES APART FROM UNTHD HOLES
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
HLM20-20OHM5PCTInterchangeable
interchangeable cross-reference
interchangeable
S6-1547Interchangeable
interchangeable cross-reference
interchangeable
AML21CHA2AHInterchangeable
interchangeable cross-reference
interchangeable
5330PL0952079Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 514762?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 514762?
514762 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 514762?
There are 4 known substitutes for 514762: HLM20-20OHM5PCT, S6-1547, AML21CHA2AH and 1 more. Substitute compatibility should be verified for your specific system.
Is 514762 still available?
514762 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 514762

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026