5143866 — PIN,GROOVED,HEADLESS

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

5143866: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.375 INCHES NOMINAL IN, material: STEEL OVERALL, overall_length: 2.000 INCHES NOMINAL IN, undercut_width: 0.071 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN, first_end_style: CHAMFERED, effective_length: 1.690 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-072-0879, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

5143866

NSN: 5315-00-072-0879
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 72582 — ROLLS-ROYCE SOLUTIONS AMERICA INC (USA)

SPECIFICATIONS

diameter	0.375 INCHES NOMINAL IN
material	STEEL OVERALL
overall_length	2.000 INCHES NOMINAL IN
undercut_width	0.071 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
first_end_style	CHAMFERED
effective_length	1.690 INCHES NOMINAL IN
style_designator	GROOVE
undercut_diameter	0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
first_end_location	BOTH ENDS
first_end_taper_angle	30.0 DEGREES NOMINAL
first_end_taper_length	0.030 INCHES NOMINAL IN
material_document_and_classification	FED STD 66,SAE 1020 FED STD SINGLE MATERIAL RESPONSE OVERALL
NSN	5315-00-072-0879

COMPONENT DIAGRAM

KEY FEATURES

•

UNDERCUT WIDTH: 0.071 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN

•

FIRST END TAPER LENGTH: 0.030 INCHES NOMINAL IN

•

UNDERCUT DIAMETER: 0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN

•

FIRST END LOCATION: BOTH ENDS

•

FIRST END STYLE: CHAMFERED

•

STYLE DESIGNATOR: GROOVE

•

MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66,SAE 1020 FED STD SINGLE MATERIAL RESPONSE OVERALL

•

DIAMETER: 0.375 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

UNDERCUT WIDTH	0.071 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
FIRST END TAPER LENGTH	0.030 INCHES NOMINAL IN
UNDERCUT DIAMETER	0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
FIRST END LOCATION	BOTH ENDS
FIRST END STYLE	CHAMFERED
STYLE DESIGNATOR	GROOVE
MATERIAL DOCUMENT AND CLASSIFICATION	FED STD 66,SAE 1020 FED STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER	0.375 INCHES NOMINAL IN
OVERALL LENGTH	2.000 INCHES NOMINAL IN
FIRST END TAPER ANGLE	30.0 DEGREES NOMINAL

OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602

SUBSTITUTES & CROSS-REFERENCES 2

5315000720879Reference document

Same NSN cross-reference

Reference document — Informative reference only

PC5143866Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 5143866?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 5143866?

5143866 is a PIN,GROOVED,HEADLESS.

What parts can replace 5143866?

There are 2 known substitutes for 5143866: 5315000720879, PC5143866. Substitute compatibility should be verified for your specific system.

What is the NSN for 5143866?

5143866 is cataloged in the U.S. Government catalog under NSN 5315-00-072-0879. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

5143866 — PIN,GROOVED,HEADLESS

Request a Quote — 5143866