PartsTable
Technical Data Sheet
Download PDF

5140205 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5140205: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.376 INCHES NOMINAL IN, diameter: 0.363 INCHES MINIMUM AND 0.368 INCHES MAXIMUM IN, head_width: 0.372 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN, head_length: 0.361 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN, chamfer_length: 0.031 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN, special_features: HOLE IN HEAD 0.160 IN. DIA IN.

This part is cataloged in the U.S. Government catalog under NSN 5315-01-169-4704, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5140205
NSN: 5315-01-169-4704
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
height0.376 INCHES NOMINAL IN
diameter0.363 INCHES MINIMUM AND 0.368 INCHES MAXIMUM IN
materialSTEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1119 OVERALL
head_width0.372 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN
head_length0.361 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
chamfer_length0.031 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
special_featuresHOLE IN HEAD 0.160 IN. DIA IN
style_designatorSTRAIGHT
pin_chamfer_angle40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
under_head_length0.330 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
NSN5315-01-169-4704
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5140205 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.031 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
HEAD WIDTH: 0.372 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN
•
UNDER HEAD LENGTH: 0.330 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
•
STYLE DESIGNATOR: STRAIGHT
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A108 ASSN STD 2ND MATERIAL RESPONSE OR ASTM A108 ASSN STD 3RD MATERIAL RESPONSE OR ASTM A108 ASSN STD 4TH MATERIAL RESPONSE OR ASTM A108 ASSN STD 5TH MATERIAL RESPONSE OR QQ-S-637 FED SPEC 6TH MATERIAL RESPONSE OR QQ-S-637 FED SPEC 7TH MATERIAL RESPONSE OR QQ-S-637 FED SPEC 8TH MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.363 INCHES MINIMUM AND 0.368 INCHES MAXIMUM IN
•
HEAD LENGTH: 0.361 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.031 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
HEAD WIDTH0.372 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN
UNDER HEAD LENGTH0.330 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
PIN CHAMFER ANGLE40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
STYLE DESIGNATORSTRAIGHT
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A108 ASSN STD 2ND MATERIAL RESPONSE OR ASTM A108 ASSN STD 3RD MATERIAL RESPONSE OR ASTM A108 ASSN STD 4TH MATERIAL RESPONSE OR ASTM A108 ASSN STD 5TH MATERIAL RESPONSE OR QQ-S-637 FED SPEC 6TH MATERIAL RESPONSE OR QQ-S-637 FED SPEC 7TH MATERIAL RESPONSE OR QQ-S-637 FED SPEC 8TH MATERIAL RESPONSE OVERALL
DIAMETER0.363 INCHES MINIMUM AND 0.368 INCHES MAXIMUM IN
HEAD LENGTH0.361 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
HEIGHT0.376 INCHES NOMINAL IN
SPECIAL FEATURESHOLE IN HEAD 0.160 IN. DIA IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5140205?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5140205?
5140205 is a PIN,STRAIGHT,HEADED.
What is the NSN for 5140205?
5140205 is cataloged in the U.S. Government catalog under NSN 5315-01-169-4704. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5140205

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.