PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 513318
513318 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, usage_design: EXTERNAL, inside_diameter: 0.142 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN, major_thickness: 0.025 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN, casehardening_indicator: NOT CASEHARDENED, material_hardness_rating: 66.5 ROCKWELL SUPERFICIAL 30-N MINIMUM AND 71.0 ROCKWELL SUPERFICIAL 30-N MAXIMUM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-023-8596, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
513318
NSN: 5340-00-023-8596
FSC: 5340
CAGE: 72599 — ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO (USA)
SPECIFICATIONS
materialSTEEL
ring_styleE
usage_designEXTERNAL
inside_diameter0.142 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
major_thickness0.025 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
casehardening_indicatorNOT CASEHARDENED
material_hardness_rating66.5 ROCKWELL SUPERFICIAL 30-N MINIMUM AND 71.0 ROCKWELL SUPERFICIAL 30-N MAXIMUM
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationFED STD NO. 66,AISI C1066 THROUGH C1090 FED STD SINGLE MATERIAL RESPONSE OR SAE 1070 THROUGH 1090 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-023-8596
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 513318 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG THICKNESS: 0.094 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 0.290 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 6063
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG LENGTH: 0.375 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: ONE HOLE
•
SECOND LEG LENGTH: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG THICKNESS0.094 INCHES NOMINAL IN
SECOND LEG WIDTH0.290 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 6063
STYLE DESIGNATORANGLE
FIRST LEG LENGTH0.375 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SECOND LEG LENGTH1.000 INCHES NOMINAL IN
FIRST LEG THICKNESS0.094 INCHES NOMINAL IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.150 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
93605-106Interchangeable
interchangeable cross-reference
interchangeable
5133-18Interchangeable
interchangeable cross-reference
interchangeable
340-0087-000Interchangeable
interchangeable cross-reference
interchangeable
7481894P5Interchangeable
interchangeable cross-reference
interchangeable
5133-18SMDRInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 513318?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 513318?
513318 is a BRACKET,ANGLE.
What parts can replace 513318?
There are 5 known substitutes for 513318: 93605-106, 5133-18, 340-0087-000 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 513318?
513318 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-023-8596. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 513318

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026