PartsTable TECHNICAL DATA SHEET
NSN 5133-01-625-1710Government record, cited

Drill, Twist5133-01-625-1710

NSN 5133-01-625-1710 · NIIN 016251710 · Part number 44418
Greenfield Industries Inc · FSC 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine · FSG 51 — Hand Tools · CAGE 60NQ9
Government record, cited
NSN 5133-01-625-1710 — this item is cataloged by the U.S. Government under National Stock Number 5133-01-625-1710. Manufacturer of record part number: 44418.
Also searched as  5133-01-625-1710 · 5133016251710 · NIIN 016251710 · 01-625-1710 · FSC 5133 Drill Bits, Counterbores, and Countersinks: Hand and Machine · CAGE 60NQ9 · 44418 · 11B5090102-15
Nearby stock numbers  ·
Features
  • Drill,twist — FSC 5133
  • Cutting End Style: GENERAL PURPOSE
  • Flute Length: 2.938 INCHES NOMINAL IN
  • Nominal Cutting Diameter: 0.2813 INCHES IN
  • Cutting Rotation Direction: LEFT-HAND
  • Shank Style: STRAIGHT ROUND
  • Flute Quantity: 2
  • Material: STEEL OVERALL
Identification
  • NSN: 5133-01-625-1710
  • NIIN: 016251710
  • FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
  • FSG: 51 — Hand Tools
  • Primary part number: 44418
  • Manufacturer: Greenfield Industries Inc
General Description

The Drill,twist, cataloged under National Stock Number 5133-01-625-1710, is classified within Federal Supply Class 5133 (Drill Bits, Counterbores, and Countersinks: Hand and Machine) of the Hand Tools group. The manufacturer of record is Greenfield Industries Inc. Government technical data includes 9 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5133-01-625-1710
Primary Part Number44418
Item NameDrill,twist
FSC / FSG5133 / 51 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
ManufacturerGreenfield Industries Inc
StatusACTIVE
Cutting End StyleGENERAL PURPOSE
Flute Length2.938 INCHES NOMINAL IN
Nominal Cutting Diameter0.2813 INCHES IN
Cutting Rotation DirectionLEFT-HAND
Shank StyleSTRAIGHT ROUND
Flute Quantity2
MaterialSTEEL OVERALL
Point Angle118.0 DEGREES NOMINAL
Point TypeCONVENTIONAL
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
44418 PRIMARY Greenfield Industries Inc (USA)
Reference documents
ReferenceMeaning
11B5090102-15 7/2 Vendor item drawing reference
Devcom Chemical Biological Center Dba Chemical Biological Center Div U.s. Dept of Army
No interchangeability data on file.
Other items in FSC 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5133-00-001-1296
5133-00-001-1296 · Item name not on file
5133-00-001-1298
5133-00-001-1298 · Item name not on file
5133-00-005-2258
5133-00-005-2258 · Item name not on file
5133-00-005-7727
5133-00-005-7727 · Item name not on file
5133-00-005-8710
5133-00-005-8710 · Item name not on file
5133-00-005-8711
5133-00-005-8711 · Item name not on file
5133-00-005-8712
5133-00-005-8712 · Item name not on file
5133-00-005-8713
5133-00-005-8713 · Item name not on file

Frequently Asked Questions

What is NSN 5133-01-625-1710?

NSN 5133-01-625-1710 is a Drill,twist, manufactured by Greenfield Industries Inc, classified under FSC 5133, Drill Bits, Counterbores, and Countersinks: Hand and Machine. Status: active.

What part numbers are listed for NSN 5133-01-625-1710?

NSN 5133-01-625-1710 has 1 manufacturer part number on file: 44418 (Greenfield Industries Inc).

What are the specifications of 44418?

Key specifications for 44418: Cutting End Style: GENERAL PURPOSE; Flute Length: 2.938 INCHES NOMINAL IN; Overall Length: 4.250 INCHES NOMINAL IN; Nominal Cutting Diameter: 0.2813 INCHES IN. 9 specifications are documented in the U.S. Government catalog.

Is NSN 5133-01-625-1710 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com