PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5132504
5132504 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BEARING,WASHER,THRUST is a the manufacturer industrial component. Key specifications include diameter: 2.2000 INCHES MINIMUM AND 2.2200 INCHES MAXIMUM IN, material: STEEL INNER LAYER, corner_shape: CHAMFERED FIRST INSIDE CORNER, surface_finish: 8.0 MICROINCHES LEFT SIDE, outside_diameter: 3.2100 INCHES MINIMUM AND 3.2200 INCHES MAXIMUM IN, special_features: FIRST INSIDE CORNER CHAMFER LENGTH 0.0469 IN. NOMINAL,FIRST INSIDE CORNER ANGLE 45.0 DEGREES IN.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-074-1911, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5132504
NSN: 3120-00-074-1911
FSC: 3120
CAGE: F0742 — DELPHI FRANCE SAS (FRA)
SPECIFICATIONS
diameter2.2000 INCHES MINIMUM AND 2.2200 INCHES MAXIMUM IN
materialSTEEL INNER LAYER
corner_shapeCHAMFERED FIRST INSIDE CORNER
surface_finish8.0 MICROINCHES LEFT SIDE
outside_diameter3.2100 INCHES MINIMUM AND 3.2200 INCHES MAXIMUM IN
special_featuresFIRST INSIDE CORNER CHAMFER LENGTH 0.0469 IN. NOMINAL,FIRST INSIDE CORNER ANGLE 45.0 DEGREES IN
style_designatorROUND
center_hole_width2.0650 INCHES MINIMUM AND 2.0850 INCHES MAXIMUM IN
overall_thickness0.1180 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM IN
lubrication_featureGROOVE FLAT BEARING SURFACE
center_hole_shape_styleROUND W/FLAT
cross-sectional_shape_styleRECTANGULAR
NSN3120-00-074-1911
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 5132504 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE FIRST OUTSIDE CORNER
•
SURFACE FINISH: 16.0 MICROINCHES RIGHT SIDE
•
MATERIAL: STEEL INNER LAYER
•
STYLE DESIGNATOR: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
CORNER SHAPESQUARE FIRST OUTSIDE CORNER
CORNER SHAPECHAMFERED FIRST INSIDE CORNER
SURFACE FINISH16.0 MICROINCHES RIGHT SIDE
CORNER SHAPESQUARE SECOND OUTSIDE CORNER
MATERIALSTEEL INNER LAYER
CORNER SHAPESQUARE SECOND INSIDE CORNER
STYLE DESIGNATORROUND
SPECIAL FEATURESFIRST INSIDE CORNER CHAMFER LENGTH 0.0469 IN. NOMINAL,FIRST INSIDE CORNER ANGLE 45.0 DEGREES IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
OVERALL THICKNESS0.1180 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
270Interchangeable
interchangeable cross-reference
interchangeable
952234-0002-000Interchangeable
interchangeable cross-reference
interchangeable
Q76913-2Interchangeable
interchangeable cross-reference
interchangeable
75354Interchangeable
interchangeable cross-reference
interchangeable
33112Interchangeable
interchangeable cross-reference
interchangeable
G9846Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5132504?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5132504?
5132504 is a BEARING,WASHER,THRUST.
What parts can replace 5132504?
There are 23 known substitutes for 5132504: 270, 952234-0002-000, Q76913-2 and 20 more. Substitute compatibility should be verified for your specific system.
Is 5132504 still available?
5132504 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5132504

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026