PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 513130-1
513130-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include body_width: 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, body_height: 0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, body_length: 0.840 INCHES MAXIMUM IN, features_provided: HERMETICALLY SEALED AND BURN IN AND LOW POWER AND SCHOTTKY AND FAST CARRY, output_logic_form: TRANSISTOR-TRANSISTOR LOGIC, inclosure_material: CERAMIC. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-182-5524, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
513130-1
NSN: 5340-00-182-5524
FSC: 5340
CAGE: 80020 — NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION JOINT BASE JBMDL (USA)
SPECIFICATIONS
body_width0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
body_height0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
body_length0.840 INCHES MAXIMUM IN
features_providedHERMETICALLY SEALED AND BURN IN AND LOW POWER AND SCHOTTKY AND FAST CARRY
output_logic_formTRANSISTOR-TRANSISTOR LOGIC
inclosure_materialCERAMIC
storage_temp_range-65.0 TO 150.0 CELSIUS DEGC
operating_temp_range-55.0 TO 125.0 CELSIUS DEGC
input_circuit_pattern9 INPUT
inclosure_configurationDUAL-IN-LINE
terminal_surface_treatmentSOLDER
terminal_type_and_quantity16 PRINTED CIRCUIT
NSN5340-00-182-5524
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 513130-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
7906162-02Interchangeable
interchangeable cross-reference
interchangeable
M38510131202BEXInterchangeable
interchangeable cross-reference
interchangeable
SN54LS283JInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 513130-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 513130-1?
513130-1 is a MICROCIRCUIT,DIGITAL.
What parts can replace 513130-1?
There are 3 known substitutes for 513130-1: 7906162-02, M38510131202BEX, SN54LS283J. Substitute compatibility should be verified for your specific system.
What is the NSN for 513130-1?
513130-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-182-5524. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 513130-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026