PartsTable
Technical Data Sheet
Download PDF

5130027 — GASKET

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5130027: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.640 INCHES NOMINAL IN, aperture_diameter: 0.500 INCHES NOMINAL IN, bolt_circle_diameter: 1.880 INCHES NOMINAL IN, outside_corner_radius: 0.380 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-513-0027, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5130027
NSN: 5315-00-513-0027
NIINs: 005130027, 008109306
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19205 — SPRINGFIELD ARMORY (USA)
SPECIFICATIONS
materialCELLULOSE OVERALL
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.640 INCHES NOMINAL IN
aperture_diameter0.500 INCHES NOMINAL IN
bolt_circle_diameter1.880 INCHES NOMINAL IN
outside_corner_radius0.380 INCHES NOMINAL IN
cross-sectional_thickness0.032 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center0.560 INCHES NOMINAL IN
NSN5315-00-513-0027
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5130027 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES OVERALL
•
UNDERCUT WIDTH: 0.035 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.145 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
•
FIRST END LOCATION: BOTH ENDS
•
FIRST END STYLE: CHAMFERED
•
STYLE DESIGNATOR: GROOVE
•
DIAMETER: 0.205 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES OVERALL
UNDERCUT WIDTH0.035 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
UNDERCUT DIAMETER0.145 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
FIRST END LOCATIONBOTH ENDS
FIRST END STYLECHAMFERED
STYLE DESIGNATORGROOVE
DIAMETER0.205 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN
OVERALL LENGTH1.489 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5130027?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5130027?
5130027 is a GASKET.
What is the NSN for 5130027?
5130027 is cataloged in the U.S. Government catalog under NSN 5315-00-513-0027. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5130027

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.