PartsTable TECHNICAL DATA SHEET
NSN 5130-01-358-8850Government record, cited

Wrench, Impact, Pneumatic5130-01-358-8850

NSN 5130-01-358-8850 · NIIN 013588850 · Part number 2707P1
Ingersoll-Rand Co Power Tool Div · FSC 5130 — Hand Tools, Power Driven · FSG 51 — Hand Tools · CAGE 65853
Government record, cited
NSN 5130-01-358-8850 — this item is cataloged by the U.S. Government under National Stock Number 5130-01-358-8850. Manufacturer of record part number: 2707P1.
Also searched as  5130-01-358-8850 · 5130013588850 · NIIN 013588850 · 01-358-8850 · FSC 5130 Hand Tools, Power Driven · CAGE 65853 · 2707P1 · 2707A1
Nearby stock numbers  ·
Features
  • Wrench,impact,pneumatic — FSC 5130
  • Hose Inside Diameter for Which Designed: 0.312 INCHES NOMINAL IN
  • Handle Type: PISTOL GRIP
  • No Load Speed in RPM: 7000.0 NOMINAL
  • Drive for Which Designed: STRAIGHT
  • Impact Blows Per Minute: 1300.0
  • Drive Surface Size: 0.500 INCHES NOMINAL IN
  • Torque Capacity: 40.0 FOOT-POUNDS MINIMUM AND 275.0 FOOT-POUNDS MAXIMUM FT
Identification
  • NSN: 5130-01-358-8850
  • NIIN: 013588850
  • FSC: 5130 — Hand Tools, Power Driven
  • FSG: 51 — Hand Tools
  • Primary part number: 2707P1
  • Manufacturer: Ingersoll-Rand Co Power Tool Div
General Description

The Wrench,impact,pneumatic, cataloged under National Stock Number 5130-01-358-8850, is classified within Federal Supply Class 5130 (Hand Tools, Power Driven) of the Hand Tools group. The manufacturer of record is Ingersoll-Rand Co Power Tool Div. Government technical data includes 12 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5130-01-358-8850
Primary Part Number2707P1
Item NameWrench,impact,pneumatic
FSC / FSG5130 / 51 — Hand Tools, Power Driven
ManufacturerIngersoll-Rand Co Power Tool Div
StatusACTIVE
Hose Inside Diameter for Which Designed0.312 INCHES NOMINAL IN
Handle TypePISTOL GRIP
No Load Speed in RPM7000.0 NOMINAL
Drive for Which DesignedSTRAIGHT
Impact Blows Per Minute1300.0
Drive Surface Size0.500 INCHES NOMINAL IN
Torque Capacity40.0 FOOT-POUNDS MINIMUM AND 275.0 FOOT-POUNDS MAXIMUM FT
Air Inlet Nominal Thread Diameter0.250 INCHES IN
Features ProvidedAIR VOLUME REGULATOR
Accessory Components and QuantityPIN RETAINER
Drive End ShapeSQUARE
Drive End TypeMALE SPINDLE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
2707P1 PRIMARY Ingersoll-Rand Co Power Tool Div (USA)
Reference documents
ReferenceMeaning
2707A1 5/9 Secondary reference
Ingersoll-Rand Co Power Tool Div
No interchangeability data on file.
Other items in FSC 5130 — Hand Tools, Power Driven
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5130-00-001-1299
5130-00-001-1299 · Item name not on file
5130-00-001-2671
5130-00-001-2671 · Item name not on file
5130-00-001-2685
5130-00-001-2685 · Item name not on file
5130-00-001-2687
5130-00-001-2687 · Item name not on file
5130-00-001-6357
5130-00-001-6357 · Item name not on file
5130-00-001-7046
PULLER,HYDRAULIC,BEARING PLUG
5130-00-004-6410
5130-00-004-6410 · Item name not on file
5130-00-004-6772
INSTALLATION TOOL,FASTENER,HYDRA

Frequently Asked Questions

What is NSN 5130-01-358-8850?

NSN 5130-01-358-8850 is a Wrench,impact,pneumatic, manufactured by Ingersoll-Rand Co Power Tool Div, classified under FSC 5130, Hand Tools, Power Driven. Status: active.

What part numbers are listed for NSN 5130-01-358-8850?

NSN 5130-01-358-8850 has 1 manufacturer part number on file: 2707P1 (Ingersoll-Rand Co Power Tool Div).

What are the specifications of 2707P1?

Key specifications for 2707P1: Hose Inside Diameter for Which Designed: 0.312 INCHES NOMINAL IN; Handle Type: PISTOL GRIP; No Load Speed in RPM: 7000.0 NOMINAL; Drive for Which Designed: STRAIGHT. 12 specifications are documented in the U.S. Government catalog.

Is NSN 5130-01-358-8850 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com