PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 51296
51296 ✓ Verified by PartsTable
Lindy · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include duty_cycle: CONTINUOUS, temp_rating: 40.0 AMBIENT CELSIUS, winding_type: PERMANENT MAGNET, enclosure_feature: OPEN, torque_rating_and_type: 1.250 INCH-POUNDS STALLED IN, inclosure_specification: COMMERCIAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0214, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
51296
NSN: 3110-00-100-0214
FSC: 3110
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
duty_cycleCONTINUOUS
temp_rating40.0 AMBIENT CELSIUS
winding_typePERMANENT MAGNET
enclosure_featureOPEN
torque_rating_and_type1.250 INCH-POUNDS STALLED IN
inclosure_specificationCOMMERCIAL
shaft_rotation_directionCLOCKWISE OR COUNTERCLOCKWISE SINGLE END
connection_type_and_voltage_rating_in_volts115.0 LINE TO NEUTRAL SINGLE INPUT
NSN3110-00-100-0214
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 51296 · Lindy ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE WIDTH: 0.8540 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0625 INCHES NOMINAL IN
•
BORE DIAMETER: 1.7716 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE WIDTH0.8540 INCHES NOMINAL IN
CONE CORNER RADIUS0.0625 INCHES NOMINAL IN
BORE DIAMETER1.7716 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
193067Interchangeable
interchangeable cross-reference
interchangeable
RC7158Interchangeable
interchangeable cross-reference
interchangeable
4912568-01Interchangeable
interchangeable cross-reference
interchangeable
10082457Interchangeable
interchangeable cross-reference
interchangeable
C12501Interchangeable
interchangeable cross-reference
interchangeable
12501Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 51296?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 51296?
51296 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Lindy.
What parts can replace 51296?
There are 28 known substitutes for 51296: 193067, RC7158, 4912568-01 and 25 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 51296?
51296 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0214. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 51296

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026