PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5128ND
5128ND ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 13.00 MILLIMETERS NOMINAL MM, overall_width: 0.6250 INCHES NOMINAL IN, load_direction: ANGULAR, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5407, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5128ND
NSN: 3110-00-156-5407
FSC: 3110
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter13.00 MILLIMETERS NOMINAL MM
overall_width0.6250 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
overall_outside_diameter32.00 MILLIMETERS NOMINAL MM
retainer_fabrication_methodSTAMPED
NSN3110-00-156-5407
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5128ND · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: STAMPED
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 13.00 MILLIMETERS NOMINAL MM
•
LOAD DIRECTION: ANGULAR
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER FABRICATION METHODSTAMPED
MATERIALSTEEL OVERALL
BORE DIAMETER13.00 MILLIMETERS NOMINAL MM
LOAD DIRECTIONANGULAR
OVERALL WIDTH0.6250 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
MATERIALSTEEL OVERALL
LOAD DIRECTIONANGULAR
OVERALL OUTSIDE DIAMETER32.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
5128Interchangeable
interchangeable cross-reference
interchangeable
RD14Interchangeable
interchangeable cross-reference
interchangeable
8726Interchangeable
interchangeable cross-reference
interchangeable
816933Interchangeable
interchangeable cross-reference
interchangeable
8524237Interchangeable
interchangeable cross-reference
interchangeable
49FInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5128ND?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5128ND?
5128ND is a BEARING,BALL,ANNULAR.
What parts can replace 5128ND?
There are 14 known substitutes for 5128ND: 5128, RD14, 8726 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5128ND?
5128ND is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5407. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5128ND

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026