PartsTable
Technical Data Sheet
Download PDF

512416A — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

512416A: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 360 OVERALL, nut_style: ROUND, nut_diameter: 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN, thread_class: 2B, nut_thickness: 0.160 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-208-3353, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
512416A
NSN: 5310-00-208-3353
FSC: 5310 — Nuts and Washers
CAGE: 82205 — BELFORT INSTRUMENT COMPANY (USA)
SPECIFICATIONS
materialCOPPER ALLOY 360 OVERALL
nut_styleROUND
nut_diameter0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN
thread_class2B
nut_thickness0.160 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
thread_seriesUNF
thread_directionRIGHT-HAND
drive_point_depth0.062 INCHES NOMINAL IN
drive_point_width0.013 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
surface_treatmentNICKEL OVERALL
nominal_thread_size0.112 INCHES IN
drive_point_quantity2
NSN5310-00-208-3353
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 512416A · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM B16 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DRIVE POINT WIDTH: 0.013 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
NUT DIAMETER: 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN
•
DRIVE POINT DEPTH: 0.062 INCHES NOMINAL IN
•
NUT THICKNESS: 0.160 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONASTM B16 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DRIVE POINT WIDTH0.013 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.112 INCHES IN
NUT DIAMETER0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN
DRIVE POINT DEPTH0.062 INCHES NOMINAL IN
NUT THICKNESS0.160 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
SURFACE TREATMENTNICKEL OVERALL
DRIVE POINT QUANTITY2
SUBSTITUTES & CROSS-REFERENCES 1
512416Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 512416A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 512416A?
512416A is a NUT,PLAIN,ROUND.
What parts can replace 512416A?
There is 1 known substitute for 512416A: 512416. Substitute compatibility should be verified for your specific system.
What is the NSN for 512416A?
512416A is cataloged in the U.S. Government catalog under NSN 5310-00-208-3353. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 512416A