PartsTable
Technical Data Sheet
Download PDF

51209-11 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

51209-11: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: OIL LUBRICATING LUBRICATION, body_style: CYLINDRICAL SERVO MOUNTED, body_length: 1.382 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, corner_shape: SQUARE ALL CORNERS, pilot_length: 0.6200 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-352-8640, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 51209-11
NSN: 3120-00-352-8640
NIINs: 003528640, 008854029
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 63728 — SEALCRAFT CORPORATION (USA)
SPECIFICATIONS
materialOIL LUBRICATING LUBRICATION
body_styleCYLINDRICAL SERVO MOUNTED
body_length1.382 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
corner_shapeSQUARE ALL CORNERS
pilot_length0.6200 INCHES NOMINAL IN
shaft_length0.313 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter0.880 INCHES NOMINAL IN
overall_length1.757 INCHES NOMINAL IN
pilot_diameter0.6250 INCHES NOMINAL IN
shaft_diameter0.1246 INCHES NOMINAL IN
NSN3120-00-352-8640
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 51209-11 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE ALL CORNERS
•
BODY OUTSIDE DIAMETER: 0.5650 INCHES MINIMUM AND 0.5660 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SOLID, PLAIN, NO OUTSIDE FLANGES
•
BODY INSIDE DIAMETER: 0.3790 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
CORNER SHAPESQUARE ALL CORNERS
BODY OUTSIDE DIAMETER0.5650 INCHES MINIMUM AND 0.5660 INCHES MAXIMUM IN
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES
OVERALL LENGTH0.4950 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM IN
BODY INSIDE DIAMETER0.3790 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY OVERALL
MATERIALOIL LUBRICATING LUBRICATION
SUBSTITUTES & CROSS-REFERENCES 5
108937Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
A533-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
X7500Reference document
Same NSN cross-reference
Reference document — Secondary reference
761310M1Reference document
Same NSN cross-reference
Reference document — Secondary reference
885036Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 51209-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 51209-11?
51209-11 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 51209-11?
There are 5 known substitutes for 51209-11: 108937, A533-2, X7500 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 51209-11?
51209-11 is cataloged in the U.S. Government catalog under NSN 3120-00-352-8640. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 51209-11