PartsTable TECHNICAL DATA SHEET
NSN 5120-00-646-7576Government record, cited

Tool, Air Check Valve5120-00-646-7576

NSN 5120-00-646-7576 · NIIN 006467576
FSC 5120 — Hand Tools, Nonedged, Nonpowered · FSG 51 — Hand Tools
Government record, cited
Also searched as  5120-00-646-7576 · 5120006467576 · NIIN 006467576 · 00-646-7576 · FSC 5120 Hand Tools, Nonedged, Nonpowered · 413-9401 · ELF646 · 646
Nearby stock numbers  ·
Features
  • Tool,air Check Valve — FSC 5120
  • General Characteristics Item Description: STEEL; TEE HANDLE; FIXED HANDLE 3/8 IN. DIA. BY 5-3/4 IN. POM 1/8 IN LG; TOOL BODY 25/32 IN DIA. BY 7-3/4 IN POM 1/4 IN LG. WORKING END. WORKING END OF BODY SHALL HAVE FLAT DRIVING MEMBER CENTERED ON BODY DIA. MEMBER SHALL BE 1/8 IN LG,1/2 IN. WIDE,.086 IN.THICK. THE MEMBER SHALL TAPER EQUALLY ONBOTH SIDES FROM 1/8 IN AT THE BASE TO 7/16 IN AT THE END,DIMENSIONAL TOLERANCE OF .005 ON IS ACCEPTABLE. WORKING END OF TOOL AND 1-3/4 IN. THEREFROM SHALL BE CASE HARDENED TO A MINIMUM DEPTH OF .005 IN.,NO SHARP EDGES. TOOL SHALL BE FREE OF RUST,PITS,BURRS,FRACTURES OR OTHER DEFECTS IN
Identification
  • NSN: 5120-00-646-7576
  • NIIN: 006467576
  • FSC: 5120 — Hand Tools, Nonedged, Nonpowered
  • FSG: 51 — Hand Tools
General Description

The Tool,air Check Valve, cataloged under National Stock Number 5120-00-646-7576, is classified within Federal Supply Class 5120 (Hand Tools, Nonedged, Nonpowered) of the Hand Tools group. Government technical data includes 1 specification, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5120-00-646-7576
Item NameTool,air Check Valve
FSC / FSG5120 / 51 — Hand Tools, Nonedged, Nonpowered
StatusACTIVE
General Characteristics Item DescriptionSTEEL; TEE HANDLE; FIXED HANDLE 3/8 IN. DIA. BY 5-3/4 IN. POM 1/8 IN LG; TOOL BODY 25/32 IN DIA. BY 7-3/4 IN POM 1/4 IN LG. WORKING END. WORKING END OF BODY SHALL HAVE FLAT DRIVING MEMBER CENTERED ON BODY DIA. MEMBER SHALL BE 1/8 IN LG,1/2 IN. WIDE,.086 IN.THICK. THE MEMBER SHALL TAPER EQUALLY ONBOTH SIDES FROM 1/8 IN AT THE BASE TO 7/16 IN AT THE END,DIMENSIONAL TOLERANCE OF .005 ON IS ACCEPTABLE. WORKING END OF TOOL AND 1-3/4 IN. THEREFROM SHALL BE CASE HARDENED TO A MINIMUM DEPTH OF .005 IN.,NO SHARP EDGES. TOOL SHALL BE FREE OF RUST,PITS,BURRS,FRACTURES OR OTHER DEFECTS IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
6105-01-110-5707M307D100 POSSIBLE MATCH
MOTOR,ELECTRICAL
Possible match (shared part number)Eaton Aerospace Llc Dba Eaton Inoac Div Fuel & Motion Control Systems Division
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
413-9401 3/9 Design control — primary reference
U.S. Government activity
ELF646 5/9 Secondary reference
Elf Machine Works, Inc Dba Elf Industries, Llc Div Elf Industries, Llc
646 5/9 Secondary reference
Elf Machine Works, Inc Dba Elf Industries, Llc Div Elf Industries, Llc
Related Parts
6105-01-110-5707POSSIBLE MATCH
MOTOR,ELECTRICAL
M307D100

Frequently Asked Questions

What is NSN 5120-00-646-7576?

NSN 5120-00-646-7576 is a Tool,air Check Valve, classified under FSC 5120, Hand Tools, Nonedged, Nonpowered. Status: active.

What NSN replaces 5120-00-646-7576?

1 possible match (shared part number, not a government interchangeability claim): 6105-01-110-5707. Verify interchangeability with system specifications before substitution.

What are the specifications of 5120-00-646-7576?

Key specifications for 5120-00-646-7576: General Characteristics Item Description: STEEL; TEE HANDLE; FIXED HANDLE 3/8 IN. DIA. BY 5-3/4 IN. POM 1/8 IN LG; TOOL BODY 25/32 IN DIA. BY 7-3/4 IN POM 1/4 IN LG. WORKING END. WORKING END OF BODY SHALL HAVE FLAT DRIVING MEMBER CENTERED ON BODY DIA. MEMBER SHALL BE 1/8 IN LG,1/2 IN. WIDE,.086 IN.THICK. THE MEMBER SHALL TAPER EQUALLY ONBOTH SIDES FROM 1/8 IN AT THE BASE TO 7/16 IN AT THE END,DIMENSIONAL TOLERANCE OF .005 ON IS ACCEPTABLE. WORKING END OF TOOL AND 1-3/4 IN. THEREFROM SHALL BE CASE HARDENED TO A MINIMUM DEPTH OF .005 IN.,NO SHARP EDGES. TOOL SHALL BE FREE OF RUST,PITS,BURRS,FRACTURES OR OTHER DEFECTS IN. 1 specification is documented in the U.S. Government catalog.

Is NSN 5120-00-646-7576 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com