PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5116242
5116242 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.120 INCHES NOMINAL IN, aperture_width: 1.120 INCHES NOMINAL IN, overall_length: 4.260 INCHES NOMINAL IN, aperture_length: 2.720 INCHES NOMINAL IN, inside_corner_radius: 0.560 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-055-1584, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5116242
NSN: 5330-00-055-1584
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.120 INCHES NOMINAL IN
aperture_width1.120 INCHES NOMINAL IN
overall_length4.260 INCHES NOMINAL IN
aperture_length2.720 INCHES NOMINAL IN
inside_corner_radius0.560 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_length3.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-055-1584
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5116242 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
APERTURE LENGTH: 2.720 INCHES NOMINAL IN
•
APERTURE WIDTH: 1.120 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.560 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL LENGTH4.260 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
APERTURE LENGTH2.720 INCHES NOMINAL IN
OVERALL WIDTH2.120 INCHES NOMINAL IN
APERTURE WIDTH1.120 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.560 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
546928Interchangeable
interchangeable cross-reference
interchangeable
5330000546928Interchangeable
interchangeable cross-reference
interchangeable
33051Interchangeable
interchangeable cross-reference
interchangeable
GF-470Interchangeable
interchangeable cross-reference
interchangeable
FF0022000Interchangeable
interchangeable cross-reference
interchangeable
33051NInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5116242?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5116242?
5116242 is a GASKET.
What parts can replace 5116242?
There are 13 known substitutes for 5116242: 546928, 5330000546928, 33051 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5116242?
5116242 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-055-1584. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5116242

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026