PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5116224
5116224 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.312 INCHES NOMINAL IN, outside_diameter: 2.504 INCHES NOMINAL IN, attachment_method: CEMENTED, surface_treatment: PAINT CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-792-9841, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5116224
NSN: 5330-00-792-9841
FSC: 5330
CAGE: 72582 — ROLLS-ROYCE SOLUTIONS AMERICA INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.312 INCHES NOMINAL IN
outside_diameter2.504 INCHES NOMINAL IN
attachment_methodCEMENTED
surface_treatmentPAINT CASE
housing_bore_diameter2.500 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.875 INCHES NOMINAL IN
NSN5330-00-792-9841
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5116224 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 2.504 INCHES NOMINAL IN
•
SEAL WIDTH: 0.312 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: ANGULAR
•
SURFACE TREATMENT: PAINT CASE
•
HOUSING BORE DIAMETER: 2.500 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER2.504 INCHES NOMINAL IN
SEAL WIDTH0.312 INCHES NOMINAL IN
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
SURFACE TREATMENTPAINT CASE
HOUSING BORE DIAMETER2.500 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER1.875 INCHES NOMINAL IN
ATTACHMENT METHODCEMENTED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
702Interchangeable
interchangeable cross-reference
interchangeable
1305-9130Interchangeable
interchangeable cross-reference
interchangeable
58-10089Interchangeable
interchangeable cross-reference
interchangeable
40723BInterchangeable
interchangeable cross-reference
interchangeable
7086903Interchangeable
interchangeable cross-reference
interchangeable
52130Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5116224?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5116224?
5116224 is a SEAL,PLAIN ENCASED.
What parts can replace 5116224?
There are 26 known substitutes for 5116224: 702, 1305-9130, 58-10089 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5116224?
5116224 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-792-9841. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5116224

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026