511534-29: SCREW,MACHINE.
The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, head_diameter: 3.6 MILLIMETERS MINIMUM AND 4.4 MILLIMETERS MAXIMUM MM, thread_length: 1.9 MILLIMETERS MINIMUM AND 2.8 MILLIMETERS MAXIMUM MM, fastener_length: 4.00 MILLIMETERS NOMINAL MM, thread_direction: RIGHT-HAND, countersink_angle: 90.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM. This part is cataloged in the U.S.
Government catalog under NSN 5305-01-227-5658, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| head_style | FLAT COUNTERSUNK |
| head_diameter | 3.6 MILLIMETERS MINIMUM AND 4.4 MILLIMETERS MAXIMUM MM |
| thread_length | 1.9 MILLIMETERS MINIMUM AND 2.8 MILLIMETERS MAXIMUM MM |
| fastener_length | 4.00 MILLIMETERS NOMINAL MM |
| thread_direction | RIGHT-HAND |
| countersink_angle | 90.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM |
| internal_drive_style | CROSS RECESS TYPE 1 |
| nominal_thread_diameter | 2.2 MILLIMETERS MM |
| screw_surface_treatment | PASSIVATE |
| minimum_tensile_strength | 80000 POUNDS PER SQUARE INCH LBS |
| thread_series_designator | M |
| thread_pitch_in_millimeters | 0.45 |
| NSN | 5305-01-227-5658 |
| EXTERNAL THREAD TOLERANCE CLASS | 6G G |
| SCREW SURFACE TREATMENT | PASSIVATE |
| FASTENER LENGTH | 4.00 MILLIMETERS NOMINAL MM |
| THREAD PITCH IN MILLIMETERS | 0.45 |
| THREAD LENGTH | 1.9 MILLIMETERS MINIMUM AND 2.8 MILLIMETERS MAXIMUM MM |
| NOMINAL THREAD DIAMETER | 2.2 MILLIMETERS MM |
| HEAD STYLE | FLAT COUNTERSUNK |
| THREAD DIRECTION | RIGHT-HAND |
| SCREW MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 |
| MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH LBS |
No substitute or cross-reference records for this part.