PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 511128-4
511128-4 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The 511128-4 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-157-2007, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
511128-4
NSN: 3110-00-157-2007
FSC: 3110
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
Part Number511128-4
NSN3110-00-157-2007
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 511128-4 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 3.1350 INCHES MAXIMUM IN
•
BORE DIAMETER: 1.8744 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.5660 INCHES NOMINAL IN
•
CONTACT ANGLE: 15.0 DEGREES NOMINAL
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER3.1350 INCHES MAXIMUM IN
BORE DIAMETER1.8744 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.5660 INCHES NOMINAL IN
CONTACT ANGLE15.0 DEGREES NOMINAL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
SPECIAL FEATURESBANDED OD,FACE OF OUTER RING FORMS LIP WHICH EXTENDS DOWN BEYOND FACE OF INNER RING
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
LOAD DIRECTIONANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
575-4000-1443959REVAPC35Interchangeable
interchangeable cross-reference
interchangeable
571-4000-1302254REVAPC35Interchangeable
interchangeable cross-reference
interchangeable
3777-102REVAPC35Interchangeable
interchangeable cross-reference
interchangeable
N1065Interchangeable
interchangeable cross-reference
interchangeable
1001Interchangeable
interchangeable cross-reference
interchangeable
V3D10361 ITEM 1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 511128-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 511128-4?
511128-4 is a 511128-4.
What parts can replace 511128-4?
There are 19 known substitutes for 511128-4: 575-4000-1443959REVAPC35, 571-4000-1302254REVAPC35, 3777-102REVAPC35 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 511128-4?
511128-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-157-2007. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 511128-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026