PartsTable
Technical Data Sheet
Download PDF

5107673 — SEAL BONNET,TUBE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5107673: SEAL BONNET,TUBE.

The SEAL BONNET,TUBE is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT, case_style: RECESSED, seal_width: 0.375 INCHES NOMINAL IN, temp_rating: -50.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, housing_bore_diameter: 1.983 INCHES NOMINAL IN, sealing_element_style: VERTICAL. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-207-7590, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5107673
NSN: 5330-01-207-7590
NIINs: 012077590, 013456908
FSC: 5330 — Packing and Gasket Materials
CAGE: 72582 — ROLLS-ROYCE SOLUTIONS AMERICA INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT
case_styleRECESSED
seal_width0.375 INCHES NOMINAL IN
temp_rating-50.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
housing_bore_diameter1.983 INCHES NOMINAL IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter1.375 INCHES NOMINAL IN
NSN5330-01-207-7590
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5107673 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -50.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: VERTICAL
•
HOUSING BORE DIAMETER: 1.983 INCHES NOMINAL IN
•
CASE STYLE: RECESSED
•
ACCOMMODATED SHAFT DIAMETER: 1.375 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT
TECHNICAL CHARACTERISTICS
TEMP RATING-50.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
SEAL WIDTH0.375 INCHES NOMINAL IN
SEALING ELEMENT STYLEVERTICAL
HOUSING BORE DIAMETER1.983 INCHES NOMINAL IN
CASE STYLERECESSED
ACCOMMODATED SHAFT DIAMETER1.375 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT
MATERIALSTEEL CASE
SUBSTITUTES & CROSS-REFERENCES 3
483562Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
00044Reference document
Same NSN cross-reference
Reference document — Secondary reference
5330012077590Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5107673?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5107673?
5107673 is a SEAL BONNET,TUBE.
What parts can replace 5107673?
There are 3 known substitutes for 5107673: 483562, 00044, 5330012077590. Substitute compatibility should be verified for your specific system.
What is the NSN for 5107673?
5107673 is cataloged in the U.S. Government catalog under NSN 5330-01-207-7590. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5107673