PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 510614
510614 ✓ Verified by PartsTable
Peach · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Laminating Pouches A3, 125 mic, matt, S-PP525-15, set of 100. Key specifications include material: STEEL OVERALL, surface_treatment: CADMIUM OVERALL, peripheral_diameter: 2.495 INCHES NOMINAL IN, center_hole_diameter: 2.093 INCHES NOMINAL IN, cross-sectional_height: 0.125 INCHES NOMINAL IN, cross-sectional_thickness: 0.020 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-218-8708, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
510614
NSN: 5330-00-218-8708
FSC: 5330
CAGE: 73842 — GOODYEAR TIRE AND RUBBER CO THE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
surface_treatmentCADMIUM OVERALL
peripheral_diameter2.495 INCHES NOMINAL IN
center_hole_diameter2.093 INCHES NOMINAL IN
cross-sectional_height0.125 INCHES NOMINAL IN
cross-sectional_thickness0.020 INCHES NOMINAL IN
cross-sectional_shape_styleCUP
NSN5330-00-218-8708
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 510614 MFR: Peach ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 2.093 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: CUP
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.020 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 2.495 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER2.093 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLECUP
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.020 INCHES NOMINAL IN
PERIPHERAL DIAMETER2.495 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
1316X1Interchangeable
interchangeable cross-reference
interchangeable
0042983Interchangeable
interchangeable cross-reference
interchangeable
M197Interchangeable
interchangeable cross-reference
interchangeable
8358615Interchangeable
interchangeable cross-reference
interchangeable
1630EG002Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 510614?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 510614?
510614 is a RETAINER,PACKING manufactured by Peach.
What parts can replace 510614?
There are 5 known substitutes for 510614: 1316X1, 0042983, M197 and 2 more. Substitute compatibility should be verified for your specific system.
Is 510614 still available?
510614 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 510614

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026