PartsTable
Technical Data Sheet
5105-2900 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

PLUG,PROTECTIVE,DUST AND MOISTUR. Key specifications include material: ALUMINUM, drive_type: SERRATED, design_type: THREADED, thread_class: 3A A, overall_diameter: 0.609 INCHES NOMINAL IN, features_provided: BEVELED SEAT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-6952, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5105-2900
NSN: 5340-00-205-6952
FSC: 5340
CAGE: 0KDP7 — KIDDE-FENWAL, LLC (USA)
SPECIFICATIONS
materialALUMINUM
drive_typeSERRATED
design_typeTHREADED
thread_class3A A
overall_diameter0.609 INCHES NOMINAL IN
features_providedBEVELED SEAT
surface_treatmentANODIZE
thread_size_and_series/type_designator7/16-20 UNF
NSN5340-00-205-6952
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5105-2900 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
FEATURES PROVIDED: BEVELED SEAT
SURFACE TREATMENT: ANODIZE
DRIVE TYPE: SERRATED
DESIGN TYPE: THREADED
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 7/16-20 UNF
OVERALL DIAMETER: 0.609 INCHES NOMINAL IN
MATERIAL: ALUMINUM
THREAD CLASS: 3A A
TECHNICAL CHARACTERISTICS (FLIS)
FEATURES PROVIDEDBEVELED SEAT
SURFACE TREATMENTANODIZE
DRIVE TYPESERRATED
DESIGN TYPETHREADED
THREAD SIZE AND SERIES/TYPE DESIGNATOR7/16-20 UNF
OVERALL DIAMETER0.609 INCHES NOMINAL IN
MATERIALALUMINUM
THREAD CLASS3A A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
M5501/1-4Upgraded Successor
successor cross-reference
successor
10117358Upgraded Successor
successor cross-reference
successor
5-4Upgraded Successor
successor cross-reference
successor
SP4Interchangeable
interchangeable cross-reference
interchangeable
7432Interchangeable
interchangeable cross-reference
interchangeable
19H912-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5105-2900?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5105-2900?
5105-2900 is a PLUG,PROTECTIVE,DUST AND MOISTUR.
What parts can replace 5105-2900?
There are 12 known substitutes for 5105-2900: M5501/1-4, 10117358, 5-4 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5105-2900?
5105-2900 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-6952. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5105-2900