PartsTable
Technical Data Sheet
Download PDF

51032-2 — TRANSFORMER,POWER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

51032-2: TRANSFORMER,POWER.

The TRANSFORMER,POWER is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY CASE, case_style: RECESSED, seal_width: 0.620 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, housing_bore_diameter: 8.382 INCHES MINIMUM AND 8.388 INCHES MAXIMUM IN, sealing_element_style: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-472-7317, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
51032-2
NSN: 5330-00-472-7317
NIINs: 004727317, 010811838, 012779154
FSC: 5330 — Packing and Gasket Materials
CAGE: 63769 — PRECISION SEALS INC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY CASE
case_styleRECESSED
seal_width0.620 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
housing_bore_diameter8.382 INCHES MINIMUM AND 8.388 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter7.375 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed557 FEET PER MINUTE FT
NSN5330-00-472-7317
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 51032-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
SEAL WIDTH: 0.620 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 8.382 INCHES MINIMUM AND 8.388 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 557 FEET PER MINUTE FT
•
CASE STYLE: RECESSED
•
ACCOMMODATED SHAFT DIAMETER: 7.375 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY CASE
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
SEAL WIDTH0.620 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER8.382 INCHES MINIMUM AND 8.388 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED557 FEET PER MINUTE FT
CASE STYLERECESSED
ACCOMMODATED SHAFT DIAMETER7.375 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY CASE
SUBSTITUTES & CROSS-REFERENCES 2
114DS346-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
510322-60Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 51032-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 51032-2?
51032-2 is a TRANSFORMER,POWER.
What parts can replace 51032-2?
There are 2 known substitutes for 51032-2: 114DS346-2, 510322-60. Substitute compatibility should be verified for your specific system.
What is the NSN for 51032-2?
51032-2 is cataloged in the U.S. Government catalog under NSN 5330-00-472-7317. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 51032-2