PartsTable
Technical Data Sheet
Download PDF

5102270 — 5102270

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

5102270: 5102270.

The 5102270 is a the manufacturer industrial component. Key specifications include material: STEEL COMP B1112 OVERALL, shank_length: 0.500 INCHES NOMINAL IN, thread_length: 0.750 INCHES NOMINAL IN, overall_length: 2.750 INCHES NOMINAL IN, shank_diameter: 0.117 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN, first_end_style: CHAMFERED. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-363-7430, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 5102270
NSN: 5315-00-363-7430
NIINs: 003637430, 010399605, 014083513
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 72587 — DETROIT ELECTRIC MOTOR WORKS INC (USA)
SPECIFICATIONS
materialSTEEL COMP B1112 OVERALL
shank_length0.500 INCHES NOMINAL IN
thread_length0.750 INCHES NOMINAL IN
overall_length2.750 INCHES NOMINAL IN
shank_diameter0.117 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
first_end_styleCHAMFERED
second_end_styleOVAL
style_designatorSHOULDER
thread_directionRIGHT-HAND
shoulder_diameter0.250 INCHES NOMINAL IN
first_end_locationSHANK END
nominal_thread_size0.250 INCHES IN
NSN5315-00-363-7430
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5102270 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.117 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
•
SECOND SHANK DIAMETER: 0.188 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.062 INCHES NOMINAL IN
•
FIRST END LOCATION: SHANK END
•
THREAD LENGTH: 0.750 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
SHANK LENGTH: 0.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SHOULDER
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.117 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
SECOND SHANK DIAMETER0.188 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.062 INCHES NOMINAL IN
FIRST END LOCATIONSHANK END
THREAD LENGTH0.750 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
SHANK LENGTH0.500 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDER
THREAD PITCH DIAMETERS+0.2237 TO 0.2268 INCHES IN
OVERALL LENGTH2.750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
5150891Reference document
Same NSN cross-reference
Reference document — Secondary reference
5101798Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5102270?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5102270?
5102270 is a 5102270. It is classified as a MRO (MRO_GENERAL).
What parts can replace 5102270?
There are 2 known substitutes for 5102270: 5150891, 5101798. Substitute compatibility should be verified for your specific system.
What is the NSN for 5102270?
5102270 is cataloged in the U.S. Government catalog under NSN 5315-00-363-7430. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5102270