PartsTable
Technical Data Sheet
510185 ✓ Verified by PartsTable
Peach · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Peach Thermal Binder Covers endow your documents with a professional appearance while simultaneously offering optimal protection. These thermal binder covers are suitable for use with both Peach thermal binders and with all thermal binders from other manufacturers. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-080-0213, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL 510185
NSN: 5331-00-080-0213
FSC: 5331 — O-RING
CAGE: 89926 — NEW HOLLAND CONSTRUCTION (USA)
SPECIFICATIONS
materialPLASTIC POLYESTER AND PLASTIC
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
head_styleFLAT CHAMFER
body_length0.799 INCHES MAXIMUM IN
design_typeEXTERIOR
head_height0.141 INCHES NOMINAL IN
surface_typeFLAT
thread_class2A A
body_diameter0.195 INCHES MAXIMUM IN
head_diameter0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
thread_length0.188 INCHES NOMINAL IN
screw_materialSTEEL COMP 1213
NSN5331-00-080-0213
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 510185 MFR: Peach ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER: 2.224 INCHES MINIMUM AND 2.244 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.224 INCHES MINIMUM AND 2.244 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
5910E9084Interchangeable
interchangeable cross-reference
interchangeable
09-23814Interchangeable
interchangeable cross-reference
interchangeable
510185Interchangeable
interchangeable cross-reference
interchangeable
73-3Interchangeable
interchangeable cross-reference
interchangeable
70923814Interchangeable
interchangeable cross-reference
interchangeable
09238148Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 510185?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 510185?
510185 is a CAPACITOR,FIXED,METALLIZED,PAPER manufactured by Peach. It is classified as a MRO (MRO_GENERAL).
What parts can replace 510185?
There are 10 known substitutes for 510185: 5910E9084, 09-23814, 510185 and 7 more. Substitute compatibility should be verified for your specific system.
Is 510185 still available?
510185 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 510185