PartsTable
Technical Data Sheet
PartsTable / MRO / 510002
510002 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The RESISTOR,FIXED,COMPOSITION is a the manufacturer industrial component. Key specifications include color: AMBER LENS, phase: SINGLE, length: 1.500 INCHES NOMINAL IN, material: RUBBER CHLOROPRENE CLASS CR, nut_style: HEXAGON, drive_type: DIRECT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-008-7892, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 510002
NSN: 5310-00-008-7892
FSC: 5310
CAGE: 82328 — DRESSER RAND CO TERRY CORP STEAM TURBINE MOTOR AND GENERATOR CO A JOINT VENTURE (USA)
SPECIFICATIONS
colorAMBER LENS
phaseSINGLE
length1.500 INCHES NOMINAL IN
materialRUBBER CHLOROPRENE CLASS CR
nut_styleHEXAGON
drive_typeDIRECT
nut_height0.328 INCHES NOMINAL IN
body_length0.250 INCHES NOMINAL IN
design_typeSINGLE CENTRALLY LOCATED HOLE
thread_class2B
air_flow_rate115.0 CUBIC FEET PER MINUTE NOMINAL
body_diameter0.090 INCHES NOMINAL IN
NSN5310-00-008-7892
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 510002 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2B
•
WIDTH ACROSS FLATS: 0.562 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD QUANTITY PER INCH: 16
•
NOMINAL THREAD SIZE: 0.357 INCHES IN
•
BEARING SURFACE TYPE: CHAMFERED
•
SURFACE TREATMENT: CADMIUM OVERALL
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2B
WIDTH ACROSS FLATS0.562 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD QUANTITY PER INCH16
NOMINAL THREAD SIZE0.357 INCHES IN
BEARING SURFACE TYPECHAMFERED
SURFACE TREATMENTCADMIUM OVERALL
NUT STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
02502Interchangeable
interchangeable cross-reference
interchangeable
24500007Interchangeable
interchangeable cross-reference
interchangeable
307-0106-00Interchangeable
interchangeable cross-reference
interchangeable
121300-0037Interchangeable
interchangeable cross-reference
interchangeable
2887314-06Interchangeable
interchangeable cross-reference
interchangeable
325-21-001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 510002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 510002?
510002 is a RESISTOR,FIXED,COMPOSITION. It is classified as a MRO (MRO_GENERAL).
What parts can replace 510002?
There are 20 known substitutes for 510002: 02502, 24500007, 307-0106-00 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 510002?
510002 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-008-7892. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 510002

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026