PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 51-527PC246
51-527PC246 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include outside_diameter: 1.516 INCHES NOMINAL IN, aperture_diameter: 1.351 INCHES NOMINAL IN, cross-sectional_thickness: 0.234 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-286-8787, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
51-527PC246
NSN: 5330-00-286-8787
FSC: 5330
CAGE: 70876 — BATH IRON WORKS CORPORATION (USA)
SPECIFICATIONS
outside_diameter1.516 INCHES NOMINAL IN
aperture_diameter1.351 INCHES NOMINAL IN
cross-sectional_thickness0.234 INCHES NOMINAL IN
NSN5330-00-286-8787
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 51-527PC246 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 1.351 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.516 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.234 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER1.351 INCHES NOMINAL IN
OUTSIDE DIAMETER1.516 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.234 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
51-527PC248Interchangeable
interchangeable cross-reference
interchangeable
601E 1.245 X 1.516 X .219Interchangeable
interchangeable cross-reference
interchangeable
M37966-1PC248Interchangeable
interchangeable cross-reference
interchangeable
5558 1-2MTLPKGInterchangeable
interchangeable cross-reference
interchangeable
E21050-211GSKT6 01EInterchangeable
interchangeable cross-reference
interchangeable
CW-2300AVPC390Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 51-527PC246?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 51-527PC246?
51-527PC246 is a GASKET.
What parts can replace 51-527PC246?
There are 14 known substitutes for 51-527PC246: 51-527PC248, 601E 1.245 X 1.516 X .219, M37966-1PC248 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 51-527PC246?
51-527PC246 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-286-8787. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 51-527PC246

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026