PartsTable
Technical Data Sheet
PartsTable / MRO / 51-10106
51-10106 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The CUTTER,MILLING,METAL SLITTING is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, minor_height: 0.093 INCHES NOMINAL IN, overall_width: 0.625 INCHES NOMINAL IN, overall_length: 12.080 INCHES NOMINAL IN, special_features: FOUR 0.128IN. MIN TO 0.230 IN MAX DIA HOLES 0.179 IN.

FROM SOLID EDGE IRREGULARLY SPACED IN, style_designator: RECTANGULAR. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-394-1570, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 51-10106
NSN: 5999-01-394-1570
FSC: 5999
CAGE: 07700 — TECHNICAL WIRE PRODUCTS, LLC DBA TWP (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
minor_height0.093 INCHES NOMINAL IN
overall_width0.625 INCHES NOMINAL IN
overall_length12.080 INCHES NOMINAL IN
special_featuresFOUR 0.128IN. MIN TO 0.230 IN MAX DIA HOLES 0.179 IN. FROM SOLID EDGE IRREGULARLY SPACED IN
style_designatorRECTANGULAR
surface_treatmentUNABLE TO DECODE
cross-sectional_height0.093 INCHES NOMINAL IN
cross-sectional_shape_styleMESH AND METAL
cross_section_outside_diameter0.250 INCHES NOMINAL IN
environmental_protection_material_locationALONG ONE EDGE
NSN5999-01-394-1570
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 51-10106 MFR CUTTER,MILLING,METAL SLITTING
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: MESH AND METAL
•
MINOR HEIGHT: 0.093 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
•
ENVIRONMENTAL PROTECTION MATERIAL LOCATION: ALONG ONE EDGE
•
SURFACE TREATMENT: UNABLE TO DECODE
•
CROSS-SECTIONAL HEIGHT: 0.093 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESFOUR 0.128IN. MIN TO 0.230 IN MAX DIA HOLES 0.179 IN. FROM SOLID EDGE IRREGULARLY SPACED IN
CROSS-SECTIONAL SHAPE STYLEMESH AND METAL
MINOR HEIGHT0.093 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
ENVIRONMENTAL PROTECTION MATERIAL LOCATIONALONG ONE EDGE
OVERALL LENGTH12.080 INCHES NOMINAL IN
SURFACE TREATMENTUNABLE TO DECODE
CROSS-SECTIONAL HEIGHT0.093 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR
CROSS SECTION OUTSIDE DIAMETER0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
SG-10MInterchangeable
interchangeable cross-reference
interchangeable
B94.19 TABLE 44Interchangeable
interchangeable cross-reference
interchangeable
00725665455162Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 51-10106?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 51-10106?
51-10106 is a CUTTER,MILLING,METAL SLITTING. It is classified as a MRO (MRO_GENERAL).
What parts can replace 51-10106?
There are 3 known substitutes for 51-10106: SG-10M, B94.19 TABLE 44, 00725665455162. Substitute compatibility should be verified for your specific system.
What is the NSN for 51-10106?
51-10106 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-394-1570. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 51-10106

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026