PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 51-005-05
51-005-05 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The REACTOR is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, body_width: 3.500 INCHES MAXIMUM IN, body_height: 4.250 INCHES MAXIMUM IN, body_length: 3.680 INCHES MAXIMUM IN, rating_method: ELECTRICAL SINGLE COMPONENT SINGLE WINDING, inclosure_type: PARTIALLY INCLOSED, DOUBLE SHELL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-221-9639, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
51-005-05
NSN: 5330-00-221-9639
FSC: 5330
CAGE: 99167 — HAMILTON SUNDSTRAND CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
body_width3.500 INCHES MAXIMUM IN
body_height4.250 INCHES MAXIMUM IN
body_length3.680 INCHES MAXIMUM IN
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
inclosure_typePARTIALLY INCLOSED, DOUBLE SHELL
inductance_typeFIXED
mounting_methodFLANGE AND SLOT SINGLE GROUP
winding_quantity1 SINGLE COMPONENT
inductance_rating2.00 HENRY NOMINAL SINGLE COMPONENT SINGLE WINDING
mounting_slot_width0.187 INCHES NOMINAL SINGLE GROUP IN
reliability_indicatorNOT ESTABLISHED
NSN5330-00-221-9639
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 51-005-05 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: ALUMINUM ALLOY OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALALUMINUM ALLOY OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
510-0505Interchangeable
interchangeable cross-reference
interchangeable
E16494Interchangeable
interchangeable cross-reference
interchangeable
BE10327001Interchangeable
interchangeable cross-reference
interchangeable
216-37267-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 51-005-05?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 51-005-05?
51-005-05 is a REACTOR.
What parts can replace 51-005-05?
There are 4 known substitutes for 51-005-05: 510-0505, E16494, BE10327001 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 51-005-05?
51-005-05 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-221-9639. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 51-005-05

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026