PartsTable
Technical Data Sheet
Download PDF

50NIF5000HMS — RESISTOR,FIXED,WIRE WOUND

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

50NIF5000HMS: RESISTOR,FIXED,WIRE WOUND.

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include body_length: 4.063 INCHES MINIMUM AND 4.187 INCHES MAXIMUM IN, body_diameter: 1.062 INCHES NOMINAL IN, terminal_type: FERRULE, inclosure_type: HERMETICALLY SEALED, terminal_length: 0.438 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN, style_designator: AXIAL TERMINAL EACH END. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-295-4088, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 50NIF5000HMS
NSN: 5905-00-295-4088
FSC: 5905 — Resistor
CAGE: 56289 — SPRAGUE ELECTRIC CO WORLD HQS (USA)
SPECIFICATIONS
body_length4.063 INCHES MINIMUM AND 4.187 INCHES MAXIMUM IN
body_diameter1.062 INCHES NOMINAL IN
terminal_typeFERRULE
inclosure_typeHERMETICALLY SEALED
terminal_length0.438 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
style_designatorAXIAL TERMINAL EACH END
electrical_resistance500.000 OHMS
reliability_indicatorNOT ESTABLISHED
resistance_tolerance_in_percent-5.000 TO 5.000
ambient_temp_at_full_rated_power25.0 CELSIUS DEGC
power_dissipation_rating_in_watts72.000 FREE AIR
temp_coefficient_of_resistance_in_ppm_per_deg_celsius-400.0 TO 400.0
NSN5905-00-295-4088
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,FIXED,WIRE WOUND TITLE COMPONENT PN 50NIF5000HMS MFR RESISTOR,FIXED,WIRE WO
KEY FEATURES
•
RESISTANCE TOLERANCE IN PERCENT: -5.000 TO 5.000
•
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS: -400.0 TO 400.0
•
BODY DIAMETER: 1.062 INCHES NOMINAL IN
•
ELECTRICAL RESISTANCE: 500.000 OHMS
•
INCLOSURE TYPE: HERMETICALLY SEALED
•
TERMINAL TYPE: FERRULE
•
TERMINAL LENGTH: 0.438 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: AXIAL TERMINAL EACH END
TECHNICAL CHARACTERISTICS
RESISTANCE TOLERANCE IN PERCENT-5.000 TO 5.000
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS-400.0 TO 400.0
BODY DIAMETER1.062 INCHES NOMINAL IN
ELECTRICAL RESISTANCE500.000 OHMS
INCLOSURE TYPEHERMETICALLY SEALED
TERMINAL TYPEFERRULE
TERMINAL LENGTH0.438 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
STYLE DESIGNATORAXIAL TERMINAL EACH END
POWER DISSIPATION RATING IN WATTS72.000 FREE AIR
AMBIENT TEMP AT FULL RATED POWER25.0 CELSIUS DEGC
SUBSTITUTES & CROSS-REFERENCES 4
K-46182-500Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
42751-500Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7471802P28Reference document
Same NSN cross-reference
Reference document — Secondary reference
RE13A372JReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 50NIF5000HMS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50NIF5000HMS?
50NIF5000HMS is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace 50NIF5000HMS?
There are 4 known substitutes for 50NIF5000HMS: K-46182-500, 42751-500, 7471802P28 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50NIF5000HMS?
50NIF5000HMS is cataloged in the U.S. Government catalog under NSN 5905-00-295-4088. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50NIF5000HMS