PartsTable / COMPONENT / 50MM612-5
50MM612-5 — Technical Data Sheet
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: PLASTIC BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.062 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-257-0046, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
50MM612-5
NSN: 5340-00-257-0046 FSC: 5340 CAGE: 7ZXR5 — KEYSIGHT TECHNOLOGIES INC (USA)
SPECIFICATIONS
diameter 0.204 INCHES NOMINAL IN material PLASTIC BAND overall_width 0.500 INCHES NOMINAL IN style_designator SINGLE LOOP tongue_hole_type ROUND, UNTHREADED material_thickness 0.062 INCHES NOMINAL IN loop_inside_diameter 0.438 INCHES NOMINAL IN distance_from_loop_center_to_tongue_end 0.74925 INCHES NOMINAL IN center_to_center_distance_between_loop_and_mounting_hole 0.53125 INCHES NOMINAL IN NSN 5340-00-257-0046
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 50MM612-5
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• TONGUE HOLE TYPE: ROUND, UNTHREADED
• MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
• STYLE DESIGNATOR: SINGLE LOOP
• DISTANCE FROM LOOP CENTER TO TONGUE END: 0.74925 INCHES NOMINAL IN
• DIAMETER: 0.204 INCHES NOMINAL IN
• LOOP INSIDE DIAMETER: 0.438 INCHES NOMINAL IN
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.53125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
TONGUE HOLE TYPE ROUND, UNTHREADED MATERIAL THICKNESS 0.062 INCHES NOMINAL IN STYLE DESIGNATOR SINGLE LOOP DISTANCE FROM LOOP CENTER TO TONGUE END 0.74925 INCHES NOMINAL IN DIAMETER 0.204 INCHES NOMINAL IN LOOP INSIDE DIAMETER 0.438 INCHES NOMINAL IN CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 0.53125 INCHES NOMINAL IN OVERALL WIDTH 0.500 INCHES NOMINAL IN MATERIAL PLASTIC BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
0911042 Interchangeable interchangeable cross-reference
interchangeable
13X4 Interchangeable interchangeable cross-reference
interchangeable
N17 Interchangeable interchangeable cross-reference
interchangeable
14031 Interchangeable interchangeable cross-reference
interchangeable
475109A1 Interchangeable interchangeable cross-reference
interchangeable
149-1008-7 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 50MM612-5?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50MM612-5?
50MM612-5 is a CLAMP,LOOP.
What parts can replace 50MM612-5?
There are 24 known substitutes for 50MM612-5: 0911042, 13X4, N17 and 21 more. Substitute compatibility should be verified for your specific system.
Is 50MM612-5 still available?
50MM612-5 is currently cancelled.
Request a Quote — 50MM612-5