PartsTable / COMPONENT / 50B9800C
50B9800C
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,INSTRUMENT MOUNTING is a the manufacturer industrial component. Key specifications include color: BLACK, width: 3.813 INCHES NOMINAL IN, height: 1.000 INCHES NOMINAL IN, length: 3.812 INCHES NOMINAL IN, material: ALUMINUM ALLOY, inside_diameter: 3.078 INCHES MINIMUM AND 3.172 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-579-6359, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
50B9800C
NSN: 5340-00-579-6359 FSC: 5340 CAGE: 91893 — MSP AVIATION, INC. DBA MSP MAUFACTURING (USA)
SPECIFICATIONS
color BLACK width 3.813 INCHES NOMINAL IN height 1.000 INCHES NOMINAL IN length 3.812 INCHES NOMINAL IN material ALUMINUM ALLOY inside_diameter 3.078 INCHES MINIMUM AND 3.172 INCHES MAXIMUM IN style_designator ROUND surface_treatment ANODIZE material_thickness 0.032 INCHES NOMINAL IN mounting_facility_height 0.375 INCHES NOMINAL IN mounting_facility_length 0.312 INCHES MAXIMUM IN adjusting_mechanism_length 1.125 INCHES NOMINAL IN NSN 5340-00-579-6359
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 50B9800C
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• HEIGHT: 1.000 INCHES NOMINAL IN
• MOUNTING FACILITY HEIGHT: 0.375 INCHES NOMINAL IN
• CENTER TO CENTER DISTANCE BETWEEN HOLES: 3.500 INCHES NOMINAL IN
• DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER: 1.750 INCHES NOMINAL IN
• WIDTH: 3.813 INCHES NOMINAL IN
• INSIDE DIAMETER: 3.078 INCHES MINIMUM AND 3.172 INCHES MAXIMUM IN
• MOUNTING FACILITY LENGTH: 0.312 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HEIGHT 1.000 INCHES NOMINAL IN MOUNTING FACILITY HEIGHT 0.375 INCHES NOMINAL IN CENTER TO CENTER DISTANCE BETWEEN HOLES 3.500 INCHES NOMINAL IN DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER 1.750 INCHES NOMINAL IN WIDTH 3.813 INCHES NOMINAL IN COLOR BLACK INSIDE DIAMETER 3.078 INCHES MINIMUM AND 3.172 INCHES MAXIMUM IN MOUNTING FACILITY LENGTH 0.312 INCHES MAXIMUM IN STYLE DESIGNATOR ROUND MATERIAL ALUMINUM ALLOY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
272001 Upgraded Successor successor cross-reference
successor
3139 Upgraded Successor successor cross-reference
successor
6001 Upgraded Successor successor cross-reference
successor
90 Upgraded Successor successor cross-reference
successor
A-A-59487 Upgraded Successor successor cross-reference
successor
AA59487-1S Upgraded Successor successor cross-reference
successor
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 50B9800C?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50B9800C?
50B9800C is a CLAMP,INSTRUMENT MOUNTING.
What parts can replace 50B9800C?
There are 18 known substitutes for 50B9800C: 272001, 3139, 6001 and 15 more. Substitute compatibility should be verified for your specific system.
Is 50B9800C still available?
50B9800C is currently cancelled.
Request a Quote — 50B9800C