PartsTable
Technical Data Sheet
Download PDF

509E831ADPN36 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

509E831ADPN36: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, nut_style: HEXAGON, nut_height: 0.831 INCHES MINIMUM AND 0.887 INCHES MAXIMUM IN, temp_rating: 751.0 FAHRENHEIT MINIMUM AND 950.0 FAHRENHEIT MAXIMUM DEGF, thread_class: 2B, thread_series: UN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-392-6692, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
509E831ADPN36
NSN: 5310-01-392-6692
FSC: 5310 — Nuts and Washers
CAGE: 03502 — GENERAL ELECTRIC CO NAVAL AND DRIVE TURBINE SYSTEMS DEPT (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
nut_styleHEXAGON
nut_height0.831 INCHES MINIMUM AND 0.887 INCHES MAXIMUM IN
temp_rating751.0 FAHRENHEIT MINIMUM AND 950.0 FAHRENHEIT MAXIMUM DEGF
thread_class2B
thread_seriesUN
thread_directionRIGHT-HAND
width_across_flats1.450 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
nominal_thread_size1.000 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch8
NSN5310-01-392-6692
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 509E831ADPN36 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.450 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
•
THREAD SERIES: UN
•
TEMP RATING: 751.0 FAHRENHEIT MINIMUM AND 950.0 FAHRENHEIT MAXIMUM DEGF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.000 INCHES IN
•
NUT HEIGHT: 0.831 INCHES MINIMUM AND 0.887 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.450 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
THREAD SERIESUN
TEMP RATING751.0 FAHRENHEIT MINIMUM AND 950.0 FAHRENHEIT MAXIMUM DEGF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.000 INCHES IN
NUT HEIGHT0.831 INCHES MINIMUM AND 0.887 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH8
MATERIALCOPPER ALLOY OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
F400A100Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 509E831ADPN36?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 509E831ADPN36?
509E831ADPN36 is a NUT,PLAIN,HEXAGON.
What parts can replace 509E831ADPN36?
There is 1 known substitute for 509E831ADPN36: F400A100. Substitute compatibility should be verified for your specific system.
What is the NSN for 509E831ADPN36?
509E831ADPN36 is cataloged in the U.S. Government catalog under NSN 5310-01-392-6692. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 509E831ADPN36

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.